IP2400-Bxxx, 8 mm, snap type
on the fieldbus)
connection
2 | Output
3 | GND
4 | Input
2 | +24 V DC UP
3 | GND
4 | GND
IP2400-Bxxx, 8 mm, snap type
The IP2400-Bxxx digital I/O module has sixteen channels that can be used as eight inputs and eight outputs. The signals are connected through 8 mm snap type connectors, both of which have four pins (with separate input and output pins). Adapter cables are available for use in input-only or output-only cases, as well as connectors for field assemby. It is also possible to use the power supply cable directly as the sensor cable. The outputs handle load currents of up to 0.5 A, are short-circuit proof and protected against inverse polarity. The state of each signal is indicated by means of light emitting diodes.
Product status:
service phase | Possibly with other technical features or equipment in case of a service order or repair
| Product variants | Communication | Bus interface |
|---|---|---|
| IP2400-B200 | Lightbus | 2 x fiber-optic socket for plug ZS1020-0010 |
| IP2400-B310 | PROFIBUS | 1 x M12 socket, 5-pin, B-coded |
| IP2400-B318 | PROFIBUS | 1 x M12 socket, 5-pin, 1 x M12 plug, 5-pin (tee-connector integrated), B-coded |
| IP2400-B400 | Interbus | 1 x M23 female socket 9-pin, 1 x M23 male socket 9-pin |
| IP2400-B510 | CANopen | 1 x M12 plug, 5-pin |
| IP2400-B518 | CANopen | 1 x M12 plug, 5-pin, 1 x M12 socket, 5-pin (tee-connector integrated) |
| IP2400-B520 | DeviceNet | 1 x M12 plug, 5-pin |
| IP2400-B528 | DeviceNet | 1 x M12 plug, 5-pin, 1 x M12 socket, 5-pin (tee-connector integrated) |
| IP2400-B730 | Modbus RTU | 1 x M12 socket, 5-pin, B-coded |
| IP2400-B800 | RS485/RS422 | 1 x M12 socket, 5-pin, B-coded |
| IP2400-B810 | RS232 | 1 x M12 socket, 5-pin, B-coded |
© Beckhoff Automation 2024 - Terms of Use