EL6733 | EtherCAT Terminal, 1-channel communication interface, PROFIBUS, master/slave
EL6733 | EtherCAT Terminal, 1-channel communication interface, PROFIBUS, master/slave
The EL6733 PROFIBUS master terminal supports the PROFIBUS protocol with all features and enables the integration of any PROFIBUS devices in the EtherCAT Terminal network. The terminal features the latest PROFIBUS technology thanks to Beckhoff’s PROFIBUS chip, which was developed in-house. This includes a high-precision isochronous mode for axis control and extended diagnostic options. These masters are the only ones that support different polling rates for slaves.
- cycle times from 200 µs possible
- PROFIBUS DP
- master and slave up to 12 MBit/s
- high-performance parameter and diagnostic interfaces
- freely configurable error management for each bus device
- reading of the bus configuration and automatic assignment of the GSD files possible
Like the FC3101 PROFIBUS PCI card, the EL6733 is used to connect to PROFIBUS networks; however, it saves space since it does not require PCI slots in the industrial PC.
Product status:
product announcement | estimated market release 4th quarter 2024
Product information
| Technical data | EL6733 |
|---|---|
| Technology | PROFIBUS master/slave terminal |
| Cycle time | differing DP cycle times per slave are possible using the CDL concept |
| Fieldbus | PROFIBUS DP (standard) |
| Number of fieldbus channels | 1 |
| Data transfer rates | 9.6 kbaud…12 Mbaud |
| Interfaces | 1 x D-sub plug, 9-pin, galvanically decoupled |
| Bus device | max. 125 slaves with up to 244 bytes input, output, parameter, configuration or diagnostic data per slave |
| Hardware diagnostics | status LEDs |
| Distributed clocks | yes |
| Bit width in the process image | total max.: 1.4 kbyte input and 1.4 kbyte output data |
| Current consumption power contacts | – |
| Weight | approx. 70 g |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE |
| Housing data | EL-24 |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 24 mm x 100 mm x 52 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | – |
| Wiring | specific push-in connection |
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use