EJ2564 | EtherCAT plug-in module, 4-channel LED output, 5…48 V DC, 4 A, RGBW, common anode
EJ2564 | EtherCAT plug-in module, 4-channel LED output, 5…48 V DC, 4 A, RGBW, common anode
EJ2564 | EtherCAT plug-in module, 4-channel LED output, 5…48 V DC, 4 A, RGBW, common anode
EJ2564 | EtherCAT plug-in module, 4-channel LED output, 5…48 V DC, 4 A, RGBW, common anode
The EJ2564 EtherCAT plug-in module controls LEDs with integrated series resistor via an adjustable (ground switching) PWM signal. Common anode RGBW LEDs can be controlled with the four channels. The operation with four LEDs of the same color is also possible with the module. The module has a flexible input voltage of 5…48 V DC. The output voltage corresponds to the input voltage. For the operation of multicolor LEDs the color portion per channel is adjustable. Thus any color mix can be realized. In addition to the color mixing per channel, the adjustment of the total brightness over all channels is also possible. Another parameter that can be adjusted is the frequency. By setting the frequency in a range of 1…16,000 Hz, stroboscopic effects can be avoided. Furthermore, visible flashes can be realized by the low frequencies.
Special features:
- flexible input voltage 5…48 V DC
- adjustable color component per channel with multicolor LEDs (adjustment of the duty cycle)
- adjustable total brightness across all channels
- adjustable frequency 1…16.000 Hz, for the avoidance of stroboscopic effects and the realization of visible flashes at low frequencies
Recommended use:
- general lighting, LED control, multicolor common anode LEDs
Product status:
regular delivery
Product information
| Technical data | EJ2564 |
|---|---|
| Connection technology | 2-wire |
| Number of outputs | 4 |
| Input voltage | 5…48 V DC |
| Load type | LED (ohmic) |
| Output voltage | ~ UIN |
| Max. output current | 4 A per channel, ∑ 15 A |
| PWM clock frequency | 1 Hz…16 kHz, 5 kHz default |
| Duty factor | 0…100% |
| Resolution | 15 bit (depending on PWM frequency) |
| Current consumption E-bus | typ. 85 mA |
| Electrical isolation | 500 V (E-bus/field potential) |
| Special features | ground switching PWM for common anode LEDs, adjustable color share per channel (duty cycle), adjustable light intensity/brightness, adjustable frequency (anti-stroboscope) |
| Weight | approx. 30 g |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Relative humidity | 95%, no condensation |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Protect. rating/installation pos. | IP20/see documentation |
| Approvals/markings | CE |
| Housing data | EJ-12-16pin |
|---|---|
| Design form | EtherCAT I/O plug-in module |
| Material | polycarbonate |
| Installation | on signal distribution board |
| Mechanical coding | EJ plug-in module: signal-specific coding pins on the housing, signal distribution board: holes in the printed circuit board |
| Locking | latching lug in circuit board cut-out |
| Connection method | field wiring: application-specific wiring level on the signal distribution board,
EJ plug-in module: 2 x 20-pin socket strip |
| Dimensions (W x H x D) | 12 mm x 66 mm x 55 mm |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use