KL2631 | Bus Terminal, 1-channel relay output, 400 V AC, 300 V DC, 2 A
400 V
KL2631 | Bus Terminal, 1-channel relay output, 400 V AC, 300 V DC, 2 A
The KL2631 output terminal has a relay which has a single contact. The relay contact is connected to the power contacts, which are suitable for use at up to 400 V AC, and can be generally used for switching devices requiring mains power. The Bus Terminal indicates its signal state by means of a light emitting diode. In order to use the high voltage of up to 400 V AC, the KL2631 must be supplied via the KL9190 power feed terminal.
Product status:
regular delivery
Product information
| Technical data | KL2631 |
|---|---|
| Number of outputs | 1 x make contacts for power contact |
| Nominal voltage | 400 V AC/300 V DC |
| Switching capacity DC | 300 V = 0.15 A; 24 V = 5 A; non-linear |
| Switching capacity AC | 1500 VA |
| Switching voltage minimum | power contact |
| Load type | ohmic, inductive, lamp load |
| Max. output current | 2 A |
| Switching current | switching capacity DC: 300 V = 0.15 A; 24 V = 5 A; non-linear; switching capacity AC: 1500 VA |
| Minimum permitted load | no data |
| Lamp test, electronic ballast | no data |
| Electrical isolation | 500 V (K-bus/field potential) |
| Current consumption power contacts | load only |
| Current consumption K-bus | typ. 80 mA |
| Bit width in the process image | 2 outputs |
| Operating cycles mech. (min.) | 1 x 107 |
| Operating cycles electr. (min.) | 1.3 x 105 (2 A/250 V AC) |
| Configuration | no address or configuration setting |
| Special features | 400 V contact |
| Weight | approx. 85 g |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring | for all KSxxxx Bus Terminals |
| Approvals/markings | CE, DNV GL |
| Housing data | KL-12-8pin | KS-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| KL2631 | Bus Terminal, 1-channel relay output, 400 V AC, 300 V DC, 2 A |
| KS2631 | Bus Terminal, 1-channel relay output, 400 V AC, 300 V DC, 2 A, pluggable wiring |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use