ZK4800-8002-xxxx | Motor connection cable 1 mm² with itec® plug system, fixed installation
Contact assembly
ZK4800-8002-xxxx | Motor connection cable 1 mm² with itec® plug system, fixed installation
Contact assembly
cables for fixed installation,
min. bending radius = 50 mm (5 x OD),
(4 x 1.0 mm² + (2 x 0.5 mm²) + (2 x AWG26)), max. cable length (in total) 25 m, vertical 5 m,
The cable is UL and CSA listed.
suitable for:
- AM801x
- AM802x
- AM803x
- AM853x
- AX8000 up to 12 A
Product status:
regular delivery
Product information
| Technical data | Head A |
|---|---|
| Installation size | itec® (Series 915) |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | Power: 3+PE, Signal: 5 |
| Mating cycles | 500 |
| Wire termination | crimp connection |
| Technical data | Head B |
|---|---|
| Installation size | Pitch dimension 7.62 mm |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 4-pin |
| Mating cycles | 25 |
| Wire termination | Push-in |
| Max. wire cross-section | AWG24 ... AWG8 (0.5 mm² ... 10 mm²) |
| Technical data | Cable by meter |
|---|---|
| Operating voltage | max. 1000 V AC (UL) |
| Cross-section (power) | 1.00 mm² (approx. AWG18) |
| Cross-section (signal) | AWG26 (approx. 0.14 mm²) |
| Use | fixed installation |
| Material jacket | PVC (polyvinyl chloride) |
| Outer cable diameter | 10.0 mm ± 0.3 mm (0.3937" ± 0.0118") |
| Min. bending radius, fixed installation | 4 x outer cable diameter |
| Jacket color | orange |
For further technical details, please refer to the data sheet.
| A1 | 44.00 mm |
| A2 | 19.00 mm |
| B1 | 60.00 mm |
| B2 | 47.00 mm |
| Ordering information | Length |
|---|---|
| ZK4800-8002-xxxx | xxxx = cable length in decimeters |
| xxxx = 0050 | example for 5 m length |
| sold by the meter, admissible total cable length see documentation of Servo Drive |
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use