EP9224-2037 | EtherCAT Box, 4-port junction, with power supply, ENP, B17
EP9224-2037 | EtherCAT Box, 4-port junction, with power supply, ENP, B17
The EP9224-2037 allows the distribution of one B17 ENP input to four EtherCAT ports and M8 power supply ports with B17-ENP forwarding. In each voltage branch, the current consumption for control voltage US and peripheral voltage UP is monitored, limited and, if necessary, switched off.
The input voltage and current values of all outputs can be evaluated via the process data. The power supply and communication of the box runs via a 5-pin B17-ENP connector with up to 15.5 A (for each US/UP). Several modules can be configured in a cascade arrangement. This voltage is switched off in the case of a short circuit on one of the four outputs or eight voltages (4 x US/UP each). The supply for the other junctions remains active. The switch-off or control takes place in such a way that the input voltage does not fall below a critical value. In the event of an error, continuous data logging of the relevant data can be retrieved.
Via the EtherCAT interface, diagnostic messages of the individual channels can be read by the master and the individual channels switched on/off and reset.
Advantages:
- 4 independent EtherCAT segments with communication and power supply
- switch-off characteristic can be selected per channel
- channels can be switched on and off individually
- current and voltage values as process data
- diagnostic data logging
Product status:
regular delivery
Product information
| Technical data | EP9224-2037 |
|---|---|
| Protocol | EtherCAT |
| Bus interface | 2 x B17 ENP, bayonet fitting, shielded |
| Task within EtherCAT system | coupling to the EtherCAT network, EtherCAT junction, feed in and monitoring of US and UP |
| Number of channels | 4 x EtherCAT, 4 x power supply |
| Infeed | ENP B17 5-pin, max. 15.5 A per US/UP at 45 °C |
| Power feedthrough | ENP B17 5-pin, max. 15.5 A per US/UP at 45 °C |
| Current rating per port | max. 4 A per US and UP |
| Power supply connection | feed: 1 x B17 ENP, 5G 1.5 mm²; downstream connection: 1 x B17 ENP, 5G 1.5 mm² |
| Data logging | recording of relevant data in case of failure |
| Special features | input voltages/currents, output currents via process data |
| Operating/storage temperature | -25…+60°C/-40…+85°C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Approvals/markings | CE, UL (in preparation) |
| Housing data | B17 infeed |
|---|---|
| Dimensions (W x H x D) | 60 mm x 150 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3; 2 fixing holes 4.5 mm diameter for M4 |
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use