IP2040-Bxxx, 8 mm, snap type
on the fieldbus)
3 | GND
4 | Output
2 | +24 V UP IN 6-7
3 | GND
4 | GND
2 | + 24 V UP IN 0-3
3 | GND
4 | GND
IP2040-Bxxx, 8 mm, snap type
The IP2040-Bxxx digital output connects the binary control signals from the automation unit on to the actuators at the process level. The eight outputs handle load currents of up to 2 A each, although the total current is limited to 12 A. The outputs are supplied by three load circuits; for this reason these modules do not relay the supply voltage. The signals are connected via 8 mm snap type connectors.
The outputs are short-circuit proof and protected against inverse connection.
Product status:
service phase | Possibly with other technical features or equipment in case of a service order or repair
| Product variants | Communication | Bus interface |
|---|---|---|
| IP2040-B200 | Lightbus | 2 x fiber-optic socket for plug ZS1020-0010 |
| IP2040-B310 | PROFIBUS | 1 x M12 socket, 5-pin, B-coded |
| IP2040-B318 | PROFIBUS | 1 x M12 socket, 5-pin, 1 x M12 plug, 5-pin (tee-connector integrated), B-coded |
| IP2040-B400 | Interbus | 1 x M23 female socket 9-pin, 1 x M23 male socket 9-pin |
| IP2040-B510 | CANopen | 1 x M12 plug, 5-pin |
| IP2040-B518 | CANopen | 1 x M12 plug, 5-pin, 1 x M12 socket, 5-pin (tee-connector integrated) |
| IP2040-B520 | DeviceNet | 1 x M12 plug, 5-pin |
| IP2040-B528 | DeviceNet | 1 x M12 plug, 5-pin, 1 x M12 socket, 5-pin (tee-connector integrated) |
| IP2040-B730 | Modbus RTU | 1 x M12 socket, 5-pin, B-coded |
| IP2040-B800 | RS485/RS422 | 1 x M12 socket, 5-pin, B-coded |
| IP2040-B810 | RS232 | 1 x M12 socket, 5-pin, B-coded |
© Beckhoff Automation 2024 - Terms of Use