EL2838 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 2 A, with channel diagnostics
1…8
+24 V
EL2838 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 2 A, with channel diagnostics
The EL2838 digital output terminal connects the binary control signals of the automation device to the actuators at process level with electrical isolation. The EtherCAT Terminal contains eight channels, which indicate their signal status by means of LEDs. The integrated diagnostics can be evaluated in the controller and are indicated by the LEDs. A diagnostic bit is set for the affected channel if there is an overload. The diagnostics serve to simplify the maintenance of the application. The power contacts are looped through. The outputs of the EL2838 are supplied via the 24 V power contact. The outputs are electrically isolated from the fieldbus side.
Special features:
- connection of different load types possible (resistive, inductive, lamp load).
- max. output current of 2 A per channel (∑ 10 A)
- short-circuit proof outputs and reverse polarity protection
- integrated diagnostic option overload
- tool-free connection due to direct plug-in technology for solid conductors
Product status:
regular delivery
Product information
| Technical data | EL2838 |
|---|---|
| Connection technology | 2-wire |
| Number of outputs | 8 |
| Nominal voltage | 24 V DC (-15%/+20%) |
| Load type | ohmic, inductive, capacitive |
| Distributed clocks | – |
| Max. output current | max. 2 A (short-circuit proof) per channel (∑ 10 A) |
| Output stage | push (high-side switch) |
| Short-circuit current | typ. < 12 A |
| Reverse voltage protection | yes |
| Breaking energy | < 1.3 J/channel |
| Switching times | typ. TON: 50 µs, typ. TOFF: 140 µs |
| Current consumption E-bus | typ. 85 mA |
| Current consumption power contacts | typ. 15 mA + load |
| Bit width in the process image | 8 bit output, 8 bit diagnostics |
| Configuration | no address or configuration setting |
| Electrical isolation | 500 V (E-bus/field potential) |
| Special features | diagnostics via process data and LED: Overload (channel-by-channel) |
| Weight | approx. 50 g |
| Operating/storage temperature | -25…+60°C/-40…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/see documentation |
| Approvals/markings | CE, UL |
| Housing data | EL-12-16pin |
|---|---|
| Design form | HD (High Density) housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxx series |
| Wiring | solid conductors (s): direct plug-in technique; fine-stranded conductors (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…1.5 mm², st*: 0.25…1.5 mm², f*: 0.14…0.75 mm² |
| Connection cross-section AWG | s*: AWG28…16, st*: AWG22…16, f*: AWG26…19 |
| Stripping length | 8…9 mm |
| Current load power contacts | Imax: 10 A |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use