ZK4505-0017-xxxx | Motor connection cable 10 mm², drag-chain suitable (service phase)
Contact assembly
ZK4505-0017-xxxx | Motor connection cable 10 mm², drag-chain suitable (service phase)
Contact assembly
flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 180 m/min, max. 5 m/s²,
min. bending radius = 225 mm (10 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 10 mm² + (2 x 1 mm²) + (2 x 1.5 mm²))
The cable is UL and CSA listed.
suitable for:
- AM308x
- AX5000 (40 A)
Product status:
service phase
Product information
| Technical data | Head A |
|---|---|
| Installation size | open end |
| Number of positions (face) | 8-wire + shield |
| Technical data | Head B |
|---|---|
| Installation size | Pitch dimension 10.16 mm |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 4-pin |
| Wire termination | Clamping yoke connection |
| Max. wire cross-section | AWG22 ... AWG4 (0.2 mm² ... 16 mm²) |
| Body color | black, similar to RAL 9011 |
| Technical data | Head C |
|---|---|
| Installation size | Pitch dimension 3.50 mm |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 5-pin |
| Wire termination | Clamping yoke connection |
| Max. wire cross-section | AWG28 ... AWG14 (0.2 mm² ... 1.5 mm²) |
| Body color | black, similar to RAL 9011 |
| Technical data | Meterware |
|---|---|
| Cross-section (power) | 10 mm² (approx. AWG8) |
| Cross-section (signal) | 1 mm² (approx. AWG18) |
| Use | drag-chain suitable |
| Material jacket | TPU (thermoplastic polyurethane) |
| Outer cable diameter | 20.3 mm ± 0.4 mm (0.7992" ± 0.0157") |
| Jacket color | orange |
| B1 | 137.00 mm |
| B2 | 52.00 mm |
| C1 | 19.00 mm |
| C2 | 25.00 mm |
| Ordering information | Length |
|---|---|
| ZK4505-0017-xxxx | xxxx = cable length in decimeters |
| xxxx = 0050 | example for 5 m length |
| sold by the meter, admissible total cable length see documentation of Servo Drive |
© Beckhoff Automation 2024 - Terms of Use