![EJ2262 | EtherCAT plug-in module, 2-channel digital output, 24 V DC, 0.5 A, oversampling](https://multimedia.beckhoff.com/media/ej2262__web_preview.png)
The EJ2262 EtherCAT plug-in module connects the binary control output signals at the process level with electrical isolation. The outputs are controlled with an adjustable integral multiple (oversampling factor: n) of the bus cycle time (n microcycles per bus cycle). For each microcycle, the module receives a process data block that is output consecutively. The timebase of the module can be synchronized precisely with other EtherCAT devices via distributed clocks. An output pattern with a significantly higher pulse sequence than the bus cycle time is thus output precisely with the system-wide timebase. This procedure enables the temporal resolution of the digital output signals to be increased to n times the bus cycle time. The maximum output rate is 1 Msamples/s.
Special features:
- push-pull output
- connection of different load types possible (ohmic, inductive, lamp load)
- synchronized operation through distributed clocks XFC technology possible
- multiple sampling of a process data through oversampling
Product status:
regular delivery
Product information
Technical data | EJ2262 |
---|---|
Number of outputs | 2 |
Rated load voltage | 24 V DC (-15%/+20%) |
Load type | ohmic, inductive, lamp load |
Oversampling factor | n = integer multiple of the cycle time, 1…1000 |
Distributed clocks | yes |
Distributed clock precision | << 1 µs |
Max. output current | 0.5 A (short-circuit proof in push operation) per channel |
Breaking energy | < 150 mJ/channel |
Output rate | max. 1 Msample/s, min. cycle 1 µs |
Auxiliary power current | typ. 10 mA + load |
Current consumption E-bus | typ. 135 mA |
Electrical isolation | 500 V (E-bus/field potential) |
Weight | approx. 30 g |
Operating/storage temperature | 0…+55°C/-25…+85°C |
Relative humidity | 95%, no condensation |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
Protect. rating/installation pos. | IP20/see documentation |
Approvals/markings | CE |
Housing data | EJ-12-16pin |
---|---|
Design form | EtherCAT I/O plug-in module |
Material | polycarbonate |
Installation | on signal distribution board |
Mechanical coding | EJ plug-in module: signal-specific coding pins on the housing, signal distribution board: holes in the printed circuit board |
Locking | latching lug in circuit board cut-out |
Connection method | field wiring: application-specific wiring level on the signal distribution board,
EJ plug-in module: 2 x 20-pin socket strip |
Dimensions (W x H x D) | 12 mm x 66 mm x 55 mm |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use