ZK4501-0015-xxxx | Motor extension cable 4 mm² with M40 plug, drag-chain suitable (service phase)
Contact assembly
ZK4501-0015-xxxx | Motor extension cable 4 mm² with M40 plug, drag-chain suitable (service phase)
Contact assembly
flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 180 m/min, max. 5 m/s²,
min. bending radius = 158 mm (10 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 4 mm² + (2 x 1 mm²) + (2 x 1.5 mm²)),
from 25 m motor choke required
The cable is UL and CSA listed.
suitable for:
- ZK4500-0015-xxxx
- ZK4502-0015-xxxx
Product status:
service phase
Product information
| Technical data | Head A |
|---|---|
| Installation size | M40 |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 8-pin |
| Wire termination | crimp connection |
| Body color | metal |
| Technical data | Head B |
|---|---|
| Installation size | M40 |
| Connector type | socket |
| Contact type | male |
| Number of positions (face) | 8-pin |
| Wire termination | crimp connection |
| Body color | metal |
| Technical data | Meterware |
|---|---|
| Cross-section (power) | 4.00 mm² (approx. AWG12) |
| Cross-section (signal) | 1 mm² (approx. AWG18) |
| Use | drag-chain suitable |
| Material jacket | PUR (polyurethane) |
| Outer cable diameter | 15.5 mm ± 0.3 mm (0.6102" ± 0.0118") |
| Jacket color | orange |
| A1 | 100.00 mm |
| A2 | 46.00 mm |
| B1 | 110.00 mm |
| B2 | 45.00 mm |
| Ordering information | Length |
|---|---|
| ZK4500-0015-xxxx | xxxx = cable length in decimeters |
| xxxx = 0050 | example for 5 m length |
| sold by the meter, admissible total cable length see documentation of Servo Drive |
© Beckhoff Automation 2024 - Terms of Use