Tách raSửaĐóng

Văn Phòng Đại Diện tại Việt Nam

#29.05, Tòa nhà Pearl Plaza, 561A, Đường Điện Biên Phủ
Phường 25, Quận Bình Thạnh
Thành Phố Hồ Chí Minh, Việt Nam

+84 28 7300-2439
info@beckhoff.com.vn
www.beckhoff.com/vi-vn/

AT2200 | EcoLine motor module, straight, without infeedNew

AT2200 | EcoLine motor module, straight, without infeed

AT2200 | EcoLine motor module, straight, without infeed

AT2200 | EcoLine motor module, straight, without infeed

AT2200 | EcoLine motor module, straight, without infeed

AT2200 | EcoLine motor module, straight, without infeed

AT2200 | EcoLine motor module, straight, without infeed

AT2200 | EcoLine motor module, straight, without infeed

AT2200 | EcoLine motor module, straight, without infeed

XTS EcoLine motor module

XTS EcoLine motor module

The AT2200 motor module is an element for setting up straight XTS track sections. Simply plugging them together is sufficient to establish an electrical connection between these motor modules. With one power supply, a maximum of 6 motor modules can be plugged together one after the other in a 3 m long infeed line. The standardized length of 500 mm enables finely scalable system lengths and represents an economical alternative to standard motor modules.

The motor module features a mechanical interface to facilitate direct mounting of guide rails. However, if the guide rail system is parallel to the motor modules, a variant without holes in the upper profile is available. This makes the motor module easier to clean and produces a harmonious overall appearance with the black coloring of the top side.

Product status:

regular delivery

Product information

System dataAT220x
Magnet pitch≥ 70 mm
Geometriesany (by combination with segments of the standard motor modules)
Alignmenthorizontally, vertically or at any angle from 1…179°
Peak forceAT9001-x550 (5-pin): 80 N (specification refer to straight sections)
Continuous forceAT9001-x550 (5-pin): 30 N (specification refers to straight sections)
Max. speed4 m/s
Max. acceleration10 g
Payloadup to 10 kg, higher loads with reduced dynamics
Cycle time250 µs
Absolute accuracy< ±0.70 mm within a straight module
Repeatability< ±0.075 mm (standstill unidirectional)
System size> 100 m, > 200 movers
Protection ratingIP65 (in assembled condition for a closed system, only waterproof for a short time, not corrosion resistant)
Approvals/markingsCE, UL
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4

Diameter specifications refer to the center point of the motor

Technical dataAT2200
Motor typelong stator linear motor segment
Design formstraight
Motor length500 mm
Connection methodconnectors between the motor modules (daisy chaining)
Length per feedmax. 3 m (voltage supply, EtherCAT)
Coolingconvection
Ambient temperature (operation)0…+40°C
Electrical dataAT2200
Rated output768 W
Operating voltage48 V DC
Rated current16 A
Peak current< 48 A
Control voltage24 V DC -15/+20%
Power consumption control voltage20 W per meter travel distance
Mechanical dataAT2200
Length500 mm
Width39.1 mm
Height96 mm
Weight4.0 kg
Ordering informationXTS motor modules
AT2200-0500motor module EcoLine, straight, 48 V DC/24 V DC, 500 mm x 39.1 mm x 96 mm (L x W x H), 4.0 kg, UL-certified
AT2200-0500-0002motor module EcoLine, straight (top profile without drilling hole), 48 V DC/24 V DC, 500 mm x 39.1 mm x 96 mm (L x W x H), 4.0 kg, UL-certified

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use