KL9380 | Mains filter terminal for dimmers
230 V AC
KL9380 | Mains filter terminal for dimmers
The KL9380 feed and filter terminal protects downstream Bus Terminals from high-energy and high-frequency interference pulses from the 230 V AC mains supply. The Bus Terminal contains a capacitance for smoothing the mains voltage and is particularly suitable for the operation of dimmer circuits. The KL9380 provides a sufficiently high pulse current for fast switching, which is particularly useful for operating a dimmer in leading edge phase control mode and for switching operations involving loads with capacitive effect that are not mains-synchronous. Thus, interference pulses can be filtered out.
Product status:
regular delivery
Product information
| Technical data | KL9380 |
|---|---|
| Current load | ≤ 10 A |
| Nominal voltage | arbitrary up to 230 V AC |
| Capacity | approx. 1 µF |
| PE contact | yes |
| Connection facility to additional power contact | 2 |
| K-bus, looped through | yes |
| Bit width in the process image | 0 |
| Housing width | 12 mm |
| Weight | approx. 50 g |
| Side by side mounting on Bus Terminals with power contact | yes |
| Side by side mounting on Bus Terminals without power contact | – |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Approvals/markings | CE |
| Housing data | KL-12-8pin | KS-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use