KL1704 | Bus Terminal, 4-channel digital input, 120…230 V AC, 10 ms
120 V/230 V
KL1704 | Bus Terminal, 4-channel digital input, 120…230 V AC, 10 ms
Economy series: AX1000 economy servo drive and AF1000 economy variable frequency drive
The KL1704 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. The direct connection of 120 V/230 V AC signals is possible. The Bus Terminal contains four channels that indicate its signal state by means of light emitting diodes.
Special features:
- direct connection of 120 V/230 V AC signals
- for AC voltage
Product status:
regular delivery
Product information
| Technical data | KL1704 |
|---|---|
| Connection technology | 2-wire |
| Number of inputs | 4 |
| Nominal voltage | 120/230 V AC |
| “0” signal voltage | 0…40 V |
| “1” signal voltage | 79…260 V |
| Input filter | typ. 10 ms |
| Input current | typ. 4.6 mA at 230 V, typ. 2.3 mA at 120 V |
| Current consumption K-bus | typ. 3 mA |
| Switching times | 10 ms |
| Electrical isolation | 500 V (K-bus/mains voltage); 3750 V AC, 1 min. |
| Bit width in the process image | 4 inputs |
| Configuration | no address or configuration setting |
| Special features | ohmic/capacitive input behavior |
| Weight | approx. 60 g |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, UL |
| Housing data | KL-12-8pin |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxx series |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 |
| Stripping length | 8…9 mm |
| Current load power contacts | Imax: 10 A |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use