EL3074 | EtherCAT Terminal, 4-channel analog input, multi-function, ±10 V, ±20 mA, 12 bit
CH1...4
+24 V
EL307x, EL4x7x: The new generation of multi-functional analog terminals
EL3074 | EtherCAT Terminal, 4-channel analog input, multi-function, ±10 V, ±20 mA, 12 bit
EL307x, EL4x7x: The new generation of multi-functional analog terminals
A new generation of Beckhoff analog I/Os
The EL3072 and EL3074 analog input terminals are the 10 V/20 mA universal inputs of the 12-bit class. The EL3074 has four single parameterizable inputs. Signals either in the range -10/0…+10 V or in the range -20/0/+4…+20 mA can be processed by each channel. Physically, the voltage and current signals should be connected to different terminal points. Each channel should then be set by the controller/TwinCAT to U or I mode via CoE. The voltage and current inputs are single-ended, which means that one connection point of each channel is connected in the terminal to +24 V or GND. All inputs are digitized with a resolution of 12 bits and transmitted electrically isolated to the higher-level automation device. With a technical measuring range of ±107% of the nominal range, the terminal also supports commissioning with sensor values in the limit range and the evaluation according to NAMUR NE43.
Product status:
regular delivery
Product information
| Technical data | Analog input |
|---|---|
| Number of inputs | 4 |
| Function | voltage measurement, current measurement |
| Wiring | 2-wire |
| Ground reference (input) | single-ended |
| Max. sampling rate | min. 500 µs (max. 2 ksps) per channel |
| Sampling type | multiplex, approx. 60 µs delay between. Ch1/2 |
| Internal resistance | voltage: typ. > 200 kΩ, current: typ. 85 Ω |
| Input filter limit frequency | 1 kHz |
| Rise time | 3 ms typ. (0…90%) |
| Dielectric strength | max. 30 V (voltage and current measurement) |
| Overcurrent protection | typ. < 50 mA |
| Measuring range, nominal | -10/0…+10 V | -20/0/+4…+20 mA |
| Measuring range, technical | -10.73…+10.73 V | -21.47…+21.47 mA |
| Resolution | 12 bit (incl. sign) |
| Measurement error/uncertainty | < ±0.3% (relative to full scale value) |
| Electrical isolation channel/channel | no |
| Technical data | General |
|---|---|
| Power supply | via the E-bus |
| Distributed clocks | – |
| Electrical isolation | channel/E-bus: functional separation 707 V DC type test |
| Current consumption E-bus | typ. 125 mA |
| Special features | U/I parameterizable, ExtendedRange 107 %, standard and compact process image, FIR/IIR filter activatable |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Weight | approx. 65 g |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Approvals/markings | CE |
| Protect. rating/installation pos. | IP20/variable |
| Housing data | EL-12-16pin |
|---|---|
| Design form | HD (High Density) housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxx series |
| Wiring | solid conductors (s): direct plug-in technique; fine-stranded conductors (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…1.5 mm², st*: 0.25…1.5 mm², f*: 0.14…0.75 mm² |
| Connection cross-section AWG | s*: AWG28…16, st*: AWG22…16, f*: AWG26…19 |
| Stripping length | 8…9 mm |
| Current load power contacts | Imax: 10 A |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use