EL2622-0010 | EtherCAT Terminal, 2-channel relay output, 230 V AC, 30 V DC, 5 A, contact-protecting switching, without power contacts
EL2622-0010 | EtherCAT Terminal, 2-channel relay output, 230 V AC, 30 V DC, 5 A, contact-protecting switching, without power contacts
The EL2622-0010 output terminal has two relays each of which has a single contact. The relay terminal switches at the zero voltage crossing to protect the contacts and is particularly suitable for capacitive loads such as LED lamps. A practical test was able to show that an EL2622-0010 remained fully functional at a capacitive continuous current load of 4 A after 200,000 switching cycles (for details see documentation). The power contacts are not passed through. The signal state of the EtherCAT Terminal is indicated by light emitting diodes.
Special features:
- Relay output
- 2 x make contact
- Suitable for ohmic, inductive and capacitive loads
- contact-protecting switching of LED lamps
- no power contacts
Product status:
regular delivery
Product information
| Technical data | EL2622-0010 |
|---|---|
| Connection technology | relay output |
| Number of outputs | 2 x make contacts |
| Nominal voltage | 230 V AC/30 V DC |
| Load type | ohmic, inductive, capacitive |
| Distributed clocks | – |
| Switching current | 5 A AC/DC per channel |
| Minimum permitted load | 0.1 mA at 0.1 V DC |
| Inductive switching current | 2 A AC/DC per channel |
| Current consumption E-bus | typ. 120 mA |
| Electrical isolation | 500 V (E-bus/field potential) |
| Current consumption power contacts | – |
| Bit width in the process image | 2 outputs + 1 input |
| Operating cycles mech. (min.) | 2 x 107 |
| Operating cycles electr. (min.) | 8 x 104 (5 A/30 V DC or 5 A/250 V AC and ohmic load) |
| Configuration | no address or configuration setting |
| Special features | soft switching at zero voltage crossing significantly extends service life with AC voltage supply |
| Weight | approx. 50 g |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring | for all ESxxxx terminals |
| Approvals/markings | CE, UL |
| Housing data | EL-12-8pin | ES-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| EL2622-0010 | EtherCAT Terminal, 2-channel relay output, 230 V AC, 30 V DC, 5 A, contact-protecting switching, without power contacts |
| ES2622-0010 | EtherCAT Terminal, 2-channel relay output, 230 V AC, 30 V DC, 5 A, contact-protecting switching, without power contacts, pluggable wiring |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use