분리고정닫기

본사 대한민국
Beckhoff Automation Co., Ltd.

대륭테크노타운 3차 12층
가산디지털2로 115
08505 금천구, 서울특별시, 대한민국

+82 2 2107-3242
info-kr@beckhoff.com
www.beckhoff.com/ko-kr/

ZK4511-0000-xxxx | Encoder extension cable 0.14 mm² with M23 plug, for fixed installation (service phase)

ZK4511-0000-xxxx | Encoder extension cable 0.14 mm² with M23 plug, for fixed installation (service phase)

ZK4511-0000-xxxx | Encoder extension cable 0.14 mm² with M23 plug, for fixed installation (service phase)

Contact assembly

Contact assembly

ZK4511-0000-xxxx | Encoder extension cable 0.14 mm² with M23 plug, for fixed installation (service phase)

ZK4511-0000-xxxx | Encoder extension cable 0.14 mm² with M23 plug, for fixed installation (service phase)

Contact assembly

Contact assembly

cables for fixed installation

min. bending radius = 137 mm (18 x OD),

(7 x 2 x 0.14 mm² + 2 x 0.5 mm²)

The cable is UL and CSA listed.

suitable for:

  • ZK4510-00x0-xxxx

Product status:

service phase

Product information

Technical dataHead A
Installation sizeM23
Connector typeplug
Contact typefemale
Number of positions (face)17-pin
Wire terminationcrimp connection
Body colormetal
Technical dataHead B
Installation sizeM23
Connector typesocket
Contact typemale
Number of positions (face)17-pin
Wire terminationcrimp connection
Body colormetal
Technical dataMeterware
Cross-section7 x 2 x 0.14 mm² + 2 x 0.5 mm²
Usefixed installation
Material jacketPVC (polyvinyl chloride)
Outer cable diameter7.6 mm ± 0.3 mm (0.2992" ± 0.0118")
Jacket colorgreen
A159.00 mm
A226.00 mm
B157.00 mm
B225.00 mm
Ordering informationLength
ZK4511-0000-xxxxxxxx = cable length in decimeters
xxxx = 0050example for 5 m length
sold by the meter, admissible total cable length see documentation of Servo Drive

© Beckhoff Automation 2024 - Terms of Use