IP23x0-Bxxx, 8 mm, snap type
on the fieldbus)
connection
3 | GND
4 | In-/Output
2 | +24 V DC UP
3 | GND
4 | GND
IP23x0-Bxxx, 8 mm, snap type
The IP2330-Bxxx digital I/O module combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 2 A, are short-circuit-proof and protected against inverse polarity. The total current for all four outputs is limited to 4 A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time or in which not all of the actuators draw 2 A signal current. The state of each signal is indicated by means of light emitting diodes. The signals are connected via 8 mm snap type connectors.
Product status:
service phase | Possibly with other technical features or equipment in case of a service order or repair
| Product variants | Communication | Bus interface |
|---|---|---|
| IP2330-B200 | Lightbus | 2 x fiber-optic socket for plug ZS1020-0010 |
| IP2330-B310 | PROFIBUS | 1 x M12 socket, 5-pin, B-coded |
| IP2330-B318 | PROFIBUS | 1 x M12 socket, 5-pin, 1 x M12 plug, 5-pin (tee-connector integrated), B-coded |
| IP2330-B400 | Interbus | 1 x M23 female socket 9-pin, 1 x M23 male socket 9-pin |
| IP2330-B510 | CANopen | 1 x M12 plug, 5-pin |
| IP2330-B518 | CANopen | 1 x M12 plug, 5-pin, 1 x M12 socket, 5-pin (tee-connector integrated) |
| IP2330-B520 | DeviceNet | 1 x M12 plug, 5-pin |
| IP2330-B528 | DeviceNet | 1 x M12 plug, 5-pin, 1 x M12 socket, 5-pin (tee-connector integrated) |
| IP2330-B730 | Modbus RTU | 1 x M12 socket, 5-pin, B-coded |
| IP2330-B800 | RS485/RS422 | 1 x M12 socket, 5-pin, B-coded |
| IP2330-B810 | RS232 | 1 x M12 socket, 5-pin, B-coded |
© Beckhoff Automation 2024 - Terms of Use