MelepaskanMemperbaikiTutup

Kantor Perwakilan Indonesia

AKR Gallery West Office Tower, 17th Floor, Unit G
Jl. Panjang No.5, Rt.11/Rw.10, Kebon Jeruk
Jakarta 11530, Indonesia

+62 21 2212-7044
sales@beckhoff.co.id
www.beckhoff.com/id-id/

EL9290 | Potential supply terminal, for voltages up to 230 V AC, with fuse

Image similar, may contain optional accessories
EL9290 | Potential supply terminal, for voltages up to 230 V AC, with fuse

EL9290 | Potential supply terminal, for voltages up to 230 V AC, with fuse

Power contact
Power contact
Power contact
Infeed L
Infeed N
PE
Top view 
Contact assembly 
EL9290 | Potential supply terminal, for voltages up to 230 V AC, with fuse

EL9290 | Potential supply terminal, for voltages up to 230 V AC, with fuse

The EL9290 potential feed terminal with fuse enables the setup of different potential groups with a fused voltage of up to 230 V AC. The supply voltage is taken up via the front terminal contacts, fused and passed through to the adjacent terminals via the internal power contacts. The fuse is a 6.3 A fuse, which can be replaced at the front.

Product status:

product announcement

Product information

Technical dataEL9290
Technologypotential supply terminal with fuse
Current load≤ 10 A
Renewed infeedyes
Nominal voltagearbitrary up to 230 V AC
Integrated fine-wire fuse…6.3 A
Electrical isolation500 V (E-bus/field potential)
PE contactyes
Connection facility to additional power contact1
Bit width in the process image0
Housing width12 mm
Side by side mounting on
EtherCAT Terminals with
power contact
yes
Side by side mounting on
EtherCAT Terminals without
power contact
yes
Weightapprox. 50 g
Operating/storage temperature0…+55°C/-25…+85°C
Approvals/markingsCE
Housing dataEL-12-6pin
Design formcompact terminal housing with signal LEDs
Materialpolycarbonate
Dimensions (W x H x D)12 mm x 100 mm x 70 mm
Installationon 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means ofdouble slot and key connection
Markinglabeling of the BZxxx series
Wiringsolid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver
Connection cross-sections*: 0.08…2.5 mm²,
st*: 0.08…2.5 mm²,
f*: 0.14…1.5 mm²
Connection cross-section AWGs*: AWG28…14,
st*: AWG28…14,
f*: AWG26…16
Current load power contactsImax: 10 A

*s: solid wire; st: stranded wire; f: with ferrule

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use