LeválasztásHozzáadásBezárás

Magyarországi központ
Beckhoff Automation Kft.

Magyarország, 1097 Budapest
Táblás utca 36–38. G. ép.

+36 1 50199-40
info@beckhoff.hu
www.beckhoff.com/hu-hu/

The IP67 EP3751-0260 EtherCAT Box module features an accelerometer and gyroscope all in one

Precise detection, even of complex rotational movements, with sensor fusion

The EP3751-0260 EtherCAT Box module by Beckhoff connects an acceleration sensor with an inertial measurement unit (IMU), i.e. with a gyroscope. This unit measuring just 30 x 86 x 22 mm thus provides accurate detection of acceleration and rotational motion in addition to shock, vibration, and tilt measurement, both as pre-processed values and as raw sensor data.

An ultra-low-noise 3-axis accelerometer with a 20-bit resolution and an adaptable measuring range of ±2, ±4 and ±8 g are integrated. The sampling frequency is 4 kHz. The built-in sensor is suitable for applications where low frequencies need to be monitored with as little noise as possible – e.g. monitoring building work, bridge monitoring, robotics or condition monitoring. In addition, the I/O box module also features a low-noise, temperature-stable 3-axis MEMS gyroscope sensor (6DoF IMU) to record rotational motion across the three axes. With these two sensors, a wide variety of motion applications can be measured using just one I/O box module, and even complex rotational motion can be recorded precisely.

The high-performance EtherCAT connection also ensures virtually delay-free transmission to the evaluating measuring system. The sensor data is parameterizable and can be transmitted as raw values (unprocessed/unfiltered) or as pre-processed measurement data. The latter can then be filtered, processed, and evaluated using TwinCAT Analytics, for example.

Ms. Éva Anna Porgánszki

Ms. Éva Anna Porgánszki
Beckhoff Automation Kft.
Táblás utca 36–38. G. ép.
1097 Budapest
Hungary

+36 1 50199-40
+36 1 50199-41
press@beckhoff.hu
www.beckhoff.com/hu-hu/