EL1872-0010 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, ground switching, flat-ribbon cable
1, 3…15
2, 4…16
1, 3…15
2, 4…16
EL1872-0010 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 10 µs, ground switching, flat-ribbon cable
The EL1872-0010 digital input terminal offers 16 channels in a very compact design. A 20-pin contact strip enables the secure connection of plug connectors using insulation displacement contact, as is usual for ribbon cables and special round cables. This significantly simplifies the wiring of many channels. The signal states of the channels are indicated by LEDs. The power contacts are connected through.
Special features:
- ground switching
- low delay due to fast 10 µs input filter
- usable, for example, for inductive or capacitive sensors
- direct connection of connectors with insulation displacement contacts
Product status:
regular delivery
Product information
| Technical data | EL1872-0010 |
|---|---|
| Connection technology | flat-ribbon cable |
| Specification | ground switching “0”: 18…30 V DC, “1”: 0…7 V DC, typ. 3 mA input current |
| Number of inputs | 16 |
| Nominal voltage | 24 V DC (-15%/+20%) |
| Rated current | max. 1 A per connection pin |
| “0” signal voltage | 18…30 V |
| “1” signal voltage | 0…7 V |
| Input current | typ. 3 mA (EN 61131-2, type 3) |
| Input filter | typ. 10 µs |
| Distributed clocks | – |
| Current consumption power contacts | typ. 45 mA from the 24 V supply (no power contacts) |
| Current consumption E-bus | typ. 100 mA |
| Electrical isolation | 500 V (E-bus/field potential) |
| Special features | – |
| Weight | approx. 60 g |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, UL |
| Housing data | EL-12-FRC |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 12 mm x 100 mm x 73 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxx series |
| Wiring | flat-ribbon cable connection |
| Connection cross-section | common flat-ribbon cables, AWG28, spacing 1.27 mm |
| Connection cross-section AWG | AWG28 |
| Stripping length | – |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use