EJ4024 | EtherCAT plug-in module, 4-channel analog output, current, 4…20 mA, 12 bit
EJ4024 | EtherCAT plug-in module, 4-channel analog output, current, 4…20 mA, 12 bit
EJ4024 | EtherCAT plug-in module, 4-channel analog output, current, 4…20 mA, 12 bit
EJ4024 | EtherCAT plug-in module, 4-channel analog output, current, 4…20 mA, 12 bit
EtherCAT plug-in modules of the EJ series
Efficient series machine manufacturing: plug-and-play in the control cabinet
EtherCAT plug-in modules: Bus Terminals for circuit boards
The EJ4024 EtherCAT plug-in module generates signals in the range between 4 and 20 mA. The power is supplied to the process level with a resolution of 12 bits and is electrically isolated. Ground potential for the output channels is common with the 24 V DC supply. The output stages are powered by the 24 V supply. The signal state is indicated by light emitting diodes.
Product status:
regular delivery
Product information
| Technical data | EJ4024 |
|---|---|
| Connection technology | 2-wire, single-ended |
| Number of outputs | 4 |
| Supply voltage electronics | 24 V DC (via distribution board) |
| Signal current | 4…20 mA |
| Distributed clocks | yes |
| Distributed clock precision | << 1 µs |
| Load | < 350 Ω (short-circuit proof) |
| Output error | < ±0.1% (relative to end value) |
| Resolution | 12 bit |
| Electrical isolation | 500 V (E-bus/field potential) |
| Conversion time | ~ 250 µs |
| Current consumption periphery | typ. 25 mA |
| Current consumption E-bus | typ. 90 mA |
| Special features | Optional watchdog: user-specific output value with ramp; user synchronization can be activated. |
| Weight | approx. 30 g |
| Operating/storage temperature | -25…+60°C/-40…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/see documentation |
| Approvals/markings | CE |
| Housing data | EJ-12-16pin |
|---|---|
| Design form | EtherCAT I/O plug-in module |
| Material | polycarbonate |
| Installation | on signal distribution board |
| Mechanical coding | EJ plug-in module: signal-specific coding pins on the housing, signal distribution board: holes in the printed circuit board |
| Locking | latching lug in circuit board cut-out |
| Connection method | field wiring: application-specific wiring level on the signal distribution board,
EJ plug-in module: 2 x 20-pin socket strip |
| Dimensions (W x H x D) | 12 mm x 66 mm x 55 mm |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use