KL2702 | Bus Terminal, 2-channel solid-state relay output, 0…230 V AC/DC, 0.3 A
230 V
KL2702 | Bus Terminal, 2-channel solid-state relay output, 0…230 V AC/DC, 0.3 A
The KL2702-xxxx output terminal uses an electronic load relay to switch a mains voltage of up to 230 V AC/DC. The switching element is a high-power MOSFET, which is connected to the power contact potential. As a semiconductor switch, it is not subject to wear. The terminal has two outputs that indicate their signal state via LEDs.
Special features:
- 2 x make contact
- max. output current
- 0.3 A (KL2702)
- 2 A (KL2702-0002)
- 1.5 A (KL2702-0020)
- mutually locked outputs (KL2702-0002)
Product status:
regular delivery
Product information
| Technical data | KL2702-0020 | KL2702-0002 | KL2702 |
|---|---|---|---|
| Connection technology | 2-/3-/4-wire | ||
| Number of outputs | 2 x make contacts | 2 x make contacts, mutually locked | 2 x make contacts |
| Nominal voltage | 0…230 V AC/DC | 0…230 V AC/DC | 0…230 V AC/DC (DC…100 Hz) |
| Load type | ohmic, inductive | ||
| Max. output current | 1.5 A steady load per channel | 2 A steady load per channel | 0.3 A steady load per channel |
| Rotating field frequency | DC…100 Hz | ||
| Surge voltage protection | from 400 V AC | ||
| Peak current | 2.5 A (20 s), 7.5 A (100 ms) | 2.5 A (20 s), 7.5 A (100 ms) | 0.5 A (20 s), 1.5 A (100 ms) |
| Contact resistance | 0.3 Ω typ., 0.4 Ω max. | 0.3 Ω typ., 0.4 Ω max. | 2.1 Ω typ., 3.2 Ω max. |
| Switch-on time | 0.2…0.4 ms | 0.2…0.4 ms | 4…6 ms |
| Switch-off time | 5…8 ms | 5…8 ms | 0.05…0.1 ms |
| Switch-on delay | 320 µs | ||
| Switch-off delay | 6.2 ms | ||
| Residual voltage | (200 mΩ) | (300 mΩ) | |
| Electrical isolation | 500 V (K-bus/field voltage), 2500 V AC (1 min.) | ||
| Leakage current (OFF state) | << 1 mA | ||
| Current consumption power contacts | only leakage and load current | ||
| Current consumption K-bus | typ. 50 mA | typ. 50 mA | typ. 10 mA |
| Bit width in the process image | 2 outputs | ||
| Configuration | no address or configuration setting | ||
| Weight | approx. 55 g | ||
| Operating/storage temperature | 0…+55°C/-25…+85°C | ||
| Relative humidity | 95%, no condensation | ||
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 | ||
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 | ||
| Protect. rating/installation pos. | IP20/variable | ||
| Pluggable wiring | – | – | for all KSxxxx Bus Terminals |
| Approvals/markings | CE | CE | CE, UL, ATEX, IECEx, DNV GL |
| Ex marking | – | – | ATEX: II 3 G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc |
| Housing data | KL-12-8pin | KS-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| KL2702 | Bus Terminal, 2-channel solid-state relay output, 0…230 V AC/DC, 0.3 A |
| KS2702 | Bus Terminal, 2-channel solid-state relay output, 0…230 V AC/DC, 0.3 A, pluggable wiring |
| KL2702-0002 | Bus Terminal, 2-channel solid state relay output, 0…230 V AC/DC, 2 A |
| KL2702-0020 | Bus Terminal, 2-channel solid state relay output, 0…230 V AC/DC, 1.5 A |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use