IP5209-B200-1000 | Fieldbus Box, 1-channel encoder interface, Lightbus, SinCos, 11 µApp, M23
on the fieldbus)
connection
1 | 1+
2 | 1-
3 | + 5 V DC Sensor
4 | GND
5 | 2+
6 | 2-
7 | 0+
8 | 0-
9 | n.c.
2 | +24 V DC UP
3 | GNDS
4 | GNDP
IP5209-B200-1000 | Fieldbus Box, 1-channel encoder interface, Lightbus, SinCos, 11 µApp, M23
The SinCos module IP5209-Bxxx serves as interface for the direct connection of a measuring sensor, for example a measuring probe with sinusoidal voltage output 1 VPP to the higher-level fieldbus. In contrast to the standard version, instead of a voltage input the special IP5209-Bxxx-1000 version has a current input for 11 µAPP measuring probes. The measuring signal is processed, interpolated and made available as a 32 bit value. The signal period resolution is 10 bits, i.e. 1024 steps. The reference mark is also stored in a 32 bit value. The current count and the reference mark value can be read. The limit frequency for the measuring signal inputs is 100 kHz.
Product status:
service phase | Possibly with other technical features or equipment in case of a service order or repair
Product information
| Technical data position measurement | IP5209-Bxxx-1000 |
|---|---|
| Connection technology | M23 connector with outer thread, 9-pin |
| Number of channels | 1 |
| Connection encoder/sensor | M23 connector with outer thread, 9-pin |
| Nominal voltage | 24 V DC (-15%/+20%) |
| Signal input | 11 µAPP |
| Encoder supply | 5 V DC |
| Sensor supply | 5 V DC from control voltage, max. 0.5 A |
| Limit frequency | 100 kHz (scanning of the input signals with 500 kHz) |
| Resolution | 10 bit, 1024 steps per period |
| Commands | set count, evaluate reference mark latch, change of direction, frequency control |
| Data transfer rates | – |
| Power supply connection | feed: 1 x M8 male socket, 4-pin, a-coded; downstream connection: 1 x M8 female socket, 4-pin, a-coded |
| Current consumption from US (without sensor current) | 130 mA |
| Bit width in the process image | input/output: 2 x 32 bit data, 1 x 8 bit control/status |
| Electrical isolation | depends on the bus system |
| Technical data | IP5209-B200-1000 |
|---|---|
| Extension modules | – |
| Digital peripheral signals | according to I/O type |
| Analog peripheral signals | according to I/O type |
| Configuration possibility | via KS2000 or the controller |
| Data transfer rates | 2.5 Mbaud |
| Bus interface | 2 x fiber-optic socket for plug ZS1020-0010 |
| Data transfer medium | fiber-optic conductor: APF (plastic) fiber (1,000 µm) |
| Power supply | control voltage: 24 V DC (-15%/+20%); load voltage: according to I/O type |
| Power supply connection | feed: 1 x M8 male socket, 4-pin, a-coded; downstream connection: 1 x M8 female socket, 4-pin, a-coded |
| Auxiliary power current | according to I/O type |
| Electrical isolation | control voltage/fieldbus: yes, control voltage/inputs or outputs: according to I/O type |
| Distance between stations | 45 m |
| Data transfer time | 0.26 ms in the case of 10 modules for 32 bit input and output each (without IP-Link) |
| Weight | approx. 250 g |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Approvals/markings | CE, UL |
| Housing data | XXL housing |
|---|---|
| Dimensions (W x H x D) | 30 mm x 210 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3 |
© Beckhoff Automation 2024 - Terms of Use