IrrotaKiinnitäSulje

EL2634 | EtherCAT Terminal, 4-channel relay output, 250 V AC, 30 V DC, 4 A

Image similar, may contain optional accessories
EL2634 | EtherCAT Terminal, 4-channel relay output, 250 V AC, 30 V DC, 4 A

EL2634 | EtherCAT Terminal, 4-channel relay output, 250 V AC, 30 V DC, 4 A

Signal LED 1
Signal LED 3
Signal LED 2
Signal LED 4
13
14
33
34
23
24
43
44
Top view 
Contact assembly 
EL2634 | EtherCAT Terminal, 4-channel relay output, 250 V AC, 30 V DC, 4 A

EL2634 | EtherCAT Terminal, 4-channel relay output, 250 V AC, 30 V DC, 4 A

The EL2634 output terminal has four relays, each with a single contact. The relay contact can be used up to 250 V AC or 30 V DC. The signal state of the EtherCAT Terminal is indicated by light emitting diodes. The EL2634 features potential-free contacts.

 

Special features:

  • Relay output
  • 4 x make contact
  • Connection of ohmic and inductive loads
  • potential-free
  • no power contacts

Product status:

regular delivery

Product information

Technical dataEL2634
Connection technologyrelay output
Number of outputs4 x make contacts
Nominal voltage250 V AC/30 V DC
Load typeohmic, inductive
Distributed clocks
Ohmic switching current4 A AC/DC per channel
Minimum permitted load0.1 mA at 0.1 V DC (at 120 operations/min.)
Inductive switching current2 A AC/DC per channel
Lamp test, electronic ballast
Current consumption E-bus80 mA
Electrical isolation500 V (E-bus/field potential)
Current consumption power contacts
Bit width in the process image4 outputs
Operating cycles mech. (min.)2 x 107 (at 18 x 103 switching cycles per hour)
Operating cycles electr. (min.)1 x 105 (3 A/30 V DC ohmic load)
Configurationno address or configuration setting
Weightapprox. 70 g
Operating/storage temperature-25…+60°C/-40…+85°C
Relative humidity95%, no condensation
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Pluggable wiringfor all ESxxxx terminals
Approvals/markingsCE, UL
Housing dataEL-12-8pinES-12-8pin
Design formcompact terminal housing with signal LEDsterminal housing with pluggable wiring level
Materialpolycarbonate
Dimensions (W x H x D)12 mm x 100 mm x 68 mm
Installationon 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means ofdouble slot and key connection
Markinglabeling of the BZxxx series
Wiringsolid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver
Connection cross-sections*: 0.08…2.5 mm²,
st*: 0.08…2.5 mm²,
f*: 0.14…1.5 mm²
s*: 0.08…1.5 mm²,
st*: 0.08…1.5 mm²,
f*: 0.14…1.5 mm²
Connection cross-section AWGs*: AWG28…14,
st*: AWG28…14,
f*: AWG26…16
s*: AWG28…16,
st*: AWG28…16,
f*: AWG26…16
Stripping length8…9 mm9…10 mm
Current load power contactsImax: 10 A

*s: solid wire; st: stranded wire; f: with ferrule

Ordering information
EL2634EtherCAT Terminal, 4-channel relay output, 250 V AC, 30 V DC, 4 A
ES2634EtherCAT Terminal, 4-channel relay output, 250 V AC, 30 V DC, 4 A, pluggable wiring

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use