SoltarAdjuntarCerrar

Oficina central México
Beckhoff Automation, S.A. de C.V.

Boulevard Manuel Ávila Camacho 2610, Torre B, Piso 9, Colonia Valle de los Pinos, Tlalnepantla de Baz
Estado de México CP 54040, México

+52 55 75998058
mexico@beckhoff.com
www.beckhoff.com/es-mx/

ZK4500-0017-xxxx | Motor connection cable 10 mm² with M40 plug, drag-chain suitable (service phase)

ZK4500-0017-xxxx | Motor connection cable 10 mm² with M40 plug, drag-chain suitable (service phase)

ZK4500-0017-xxxx | Motor connection cable 10 mm² with M40 plug, drag-chain suitable (service phase)

Contact assembly

Contact assembly

ZK4500-0017-xxxx | Motor connection cable 10 mm² with M40 plug, drag-chain suitable (service phase)

ZK4500-0017-xxxx | Motor connection cable 10 mm² with M40 plug, drag-chain suitable (service phase)

Contact assembly

Contact assembly

highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,

min. bending radius = 95 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,

(4 x 10 mm² + (2 x 1 mm²) + (2 x 1,5 mm²)),

from 25 m motor choke required.

The cable is UL and CSA listed.

suitable for:

  • AM307x (winding code Q)
  • AX5000 (40 A)

Product status:

service phase

Product information

Technical dataHead A
Installation sizeM40
Connector typeplug
Contact typefemale
Number of positions (face)8-pin
Wire terminationcrimp connection
Body colormetal
Technical dataHead B
Installation sizePitch dimension 10.16 mm
Connector typeplug
Contact typefemale
Number of positions (face)4-pin
Wire terminationClamping yoke connection
Max. wire cross-sectionAWG22 ... AWG4 (0.2 mm² ... 16 mm²)
Body colorblack, similar to RAL 9011
Technical dataHead C
Installation sizePitch dimension 3.50 mm
Connector typeplug
Contact typefemale
Number of positions (face)5-pin
Wire terminationClamping yoke connection
Max. wire cross-sectionAWG28 ... AWG14 (0.2 mm² ... 1.5 mm²)
Body colorblack, similar to RAL 9011
Technical dataMeterware
Cross-section (power)10 mm² (approx. AWG8)
Cross-section (signal)1 mm² (approx. AWG18)
Usedrag-chain suitable
Material jacketTPU (thermoplastic polyurethane)
Outer cable diameter20.3 mm ± 0.4 mm (0.7992" ± 0.0157")
Jacket colororange
A1100.00 mm
A246.00 mm
B1137.00 mm
B252.00 mm
C119.00 mm
C225.00 mm
Ordering informationLength
ZK4500-0017-xxxxxxxx = cable length in decimeters
xxxx = 0050example for 5 m length
sold by the meter, admissible total cable length see documentation of Servo Drive

© Beckhoff Automation 2024 - Terms of Use