KL2701 | Bus Terminal, 1-channel solid-state relay output, 0…230 V AC/DC, 3 A
230 V
KL2701 | Bus Terminal, 1-channel solid-state relay output, 0…230 V AC/DC, 3 A
The KL2701 output terminal uses an electronic load relay to switch a mains voltage of up to 230 V AC/DC with an output current of 3 A. The switching element is a high-power MOSFET, which is connected to the power contact potential. As a semiconductor switch, it is not subject to wear. The KL2701 terminal has one independent output. Its signal state is indicated by means of a light emitting diode.
Product status:
regular delivery
Product information
| Technical data | KL2701 |
|---|---|
| Connection technology | 2-/3-/4-wire |
| Number of outputs | 1 x make contact |
| Nominal voltage | 0…230 V AC/DC |
| Load type | ohmic, inductive |
| Max. output current | 3 A steady load |
| Surge voltage protection | from 400 V AC |
| Peak current | 5 A (20 s), 50 A (100 ms) |
| Switching current | peak current: 5 A (20 s), 50 A (100 ms) |
| Recommended fuse | ≤ 10 A fast fuse |
| Contact resistance | 0.1 Ω typ. |
| Switch-off time | 2…4 ms |
| Residual voltage | (100 mΩ) |
| Electrical isolation | 500 V (K-bus/field voltage), 2500 V AC (1 min.) |
| Leakage current (OFF state) | << 1 mA |
| Switching speed | typ. 1.65 ms, 5 ms max. |
| Current consumption power contacts | only leakage and load current |
| Current consumption K-bus | typ. 65 mA |
| Bit width in the process image | 2 outputs |
| Configuration | no address or configuration setting |
| Weight | approx. 55 g |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring | for all KSxxxx Bus Terminals |
| Approvals/markings | CE |
| Housing data | KL-12-8pin | KS-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| KL2701 | Bus Terminal, 1-channel solid-state relay output, 0…230 V AC/DC, 3 A |
| KS2701 | Bus Terminal, 1-channel solid-state relay output, 0…230 V AC/DC, 3 A, pluggable wiring |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use