EPP1518-0002 | EtherCAT P Box, 8-channel digital input, counter, 24 V DC, 1 kHz, M12
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
2 | Input B
3 | GNDS
4 | Input A
5 | n.c.
EPP1518-0002 | EtherCAT P Box, 8-channel digital input, counter, 24 V DC, 1 kHz, M12
EtherCAT P: The one cable solution – One step closer to automation without control cabinets
The EPP1518-0002 EtherCAT P Box with digital inputs acquires binary control signals from the process level and transfers them, with electrical isolation, to the controller. The signal state is indicated by LEDs; screw-type M12 connectors are used for the connection.
The input filters can be set between 0 and 100 ms via EtherCAT. The inputs 0 and 4 can be used as 32-bit up/down counters. The sensors are supplied via the control voltage US in two groups of four sensors each. This voltage is short-circuit proof. Any short circuits on the sensor side are detected and reported to the controller. The load voltage UP is not used in the input module.
Product status:
regular delivery
Product information
| Technical data | EPP1518-0002 |
|---|---|
| Protocol | EtherCAT |
| Bus interface | 2 x M8 socket, P-coded, shielded |
| Specification | EN 61131-2, type 1/3 |
| Number of inputs | 8, 2 of which can be used as 32 bit up/down counters |
| Input connections | M12 x 1, 5-pin, a-coded |
| Counting frequency | max. 1 kHz |
| Nominal input voltage | 24 V DC (-15%/+20%) |
| Input filter | adjustable 0…100 ms |
| “0” signal voltage | -3…+5 V (EN 61131-2, type 3) |
| “1” signal voltage | 11…30 V (EN 61131-2, type 3) |
| Input current | typ. 3 mA (EN 61131-2, type 3) |
| Distributed clocks | yes |
| Sensor supply | from control voltage, max. 0.5 A per 4 sensors, short-circuit proof |
| Current consumption from US | typ. 100 mA |
| Electrical isolation | 500 V |
| Special features | adjustable filters |
| Weight | approx. 165 g |
| Operating/storage temperature | -25…+60°C/-40…+85°C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Approvals/markings | CE |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Housing data | 8 x M8, 4 x M12 |
|---|---|
| Dimensions (W x H x D) | 30 mm x 126 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3 |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use