KL2751 | Bus Terminal, 1-channel universal dimmer, 230 V AC, 300 VA
value > 0
overload
230 V
KL2751 | Bus Terminal, 1-channel universal dimmer, 230 V AC, 300 VA
The KL2751 dimmer Bus Terminal is intended for direct connection of different lighting devices. Dimmable lighting devices such as incandescent lamps, inductive and electronic ballasts, are detected and controlled in the correct operating mode. The required brightness values are specified via the process data. The KL2751 calculates the correct phase control angle in leading or trailing edge phase control for the required value. The output is short-circuit-proof and overload-proof. The KL2751 can be operated at any fieldbus. The load status can be read.
The KL2751 is also available as KL2751-0011 variant without power contacts.
Product status:
regular delivery
Product information
| Technical data | KL2751 |
|---|---|
| Connection technology | 4-wire |
| Number of outputs | 1 |
| Nominal voltage | 230 V AC |
| Mains voltage | 230 V AC (50 Hz) |
| Rated output | 300 VA (W) |
| Rated current | max. 1.35 A |
| Load type | ohmic, inductive or capacitive (not mixed), lamp load, automatic load detection |
| Max. output current | 1.35 A |
| Short-circuit current | 10…20 A |
| Control type | phase control |
| Resolution | 1% |
| Electrical isolation | 500 V (K-bus/field voltage), 3750 V AC (1 min.) |
| Leakage current (OFF state) | < 1 mA |
| Current consumption power contacts | load only |
| Current consumption K-bus | typ. 95 mA |
| Bit width in the process image | output: 1 x 16 bit data (1 x 8 bit control/status optional) |
| Special features | dimmers with fieldbus functionality |
| Weight | approx. 60 g |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/see documentation |
| Pluggable wiring | for all KSxxxx Bus Terminals |
| Approvals/markings | CE |
| Housing data | KL-12-8pin | KS-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| KL2751 | Bus Terminal, 1-channel universal dimmer, 230 V AC, 300 VA |
| KS2751 | Bus Terminal, 1-channel universal dimmer, 230 V AC, 300 VA, pluggable wiring |
| KL2751-0011 | Bus Terminal, 1-channel universal dimmer, 230 V AC, 300 VA, without power contacts |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use