AM3011-wByz-000a | Servomotor 0.18 Nm (M0), F1 (40 mm) (service phase)
AM3011-wByz-000a | Servomotor 0.18 Nm (M0), F1 (40 mm) (service phase)
The AM3011 low-inertia servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 230 V AC voltage range. The standstill torque of the motor is 0.18 Nm. The low-inertia servomotor with flange code F1 (40 mm) and motor length 1 has a shaft diameter b = 8 k6 and a free shaft end of d = 25 mm.
Product status:
regular delivery (not recommended for new projects) | recommended alternative: AM8011
Product information
| Data for 230 V AC | AM3011-wByz-000a |
|---|---|
| Motor type | synchronous servomotors |
| Nominal voltage | 230 V AC |
| Standstill torque | 0.18 Nm |
| Rated torque | 0.17 Nm |
| Peak torque | 0.708 Nm |
| Rated speed | 8000 min-1 |
| Rated power | 0.14 kW |
| Standstill current | 1.16 A |
| Peak current | 5.8 A |
| Torque constant | 0.16 Nm/A |
| Rotor moment of inertia | 0.017 kgcm² |
| Motor feedback | resolver, single-turn absolute encoder, multi-turn absolute encoder |
| Cooling | convection |
| Connection method | M23 |
| Ambient temperature (operation) | +5…+40 °C |
| Approvals/markings | CE, cURus, EAC |
All electric quantities are RMS values.
Options such as shaft seal, holding brake, absolute encoder can lead to a reduction of the nominal rating.
| Housing data | AM30xx |
|---|---|
| Protection rating | IP54 |
| Design form | flange-mounted according to IM B5, IM V1, IM V3 |
| Material | aluminum die-cast |
| Coating/surface | coated |
| Dimensions | AM3011-wByz-000a |
|---|---|
| a | 30 j6 |
| b | 8 k6 |
| d | 25 mm |
| l | 46 mm |
| r | 40 mm |
| k (encoder) (without brake) | 79.1 mm |
| k (encoder) (with brake) | 116.1 mm |
| k (resolver) (without brake) | 69.6 mm |
| k (resolver) (with brake) | 106.6 mm |
| Order reference
AM3011-wByz-000a | |
|---|---|
| u | flange code |
| v | motor length |
| w = 0 | smooth shaft (standard) |
| w = 1 | shaft with groove and feather key according to DIN 6885 |
| w = 2 | shaft with IP65 sealing ring and smooth shaft (AM301x to AM303x) |
| w = 3 | shaft with IP65 sealing ring and shaft with groove and feather key (AM301x to AM303x) |
| x | winding code A…T |
| y = 0 | resolver, 2-pole |
| y = A | single-turn absolute encoder, Hiperface, absolute position within one revolution, electronic identification plate, AM301x: 16 sine periods per revolution |
| y = B | multi-turn absolute encoder, Hiperface, absolute position within one revolution, electronic identification plate, AM301x: 4,096 sine periods per revolution |
| z = 0 | without holding brake |
| a = 1 | supply cable 0.5 m with non-detachable plugs (only for AM301x/AM302x), only for resolver (y = 0) |
| a = 5 | yTec plug (only for AM301x) |
| The options cannot be installed in the field. Options such as shaft seal, holding brake, absolute encoder can lead to a reduction of the nominal rating. |
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use