KM2642 | Bus Terminal module, 2-channel digital output, 230 V AC, 6 A, manual/automatic operation
(Output 1)
(Output 2)
KM2642 | Bus Terminal module, 2-channel digital output, 230 V AC, 6 A, manual/automatic operation
The digital KM2642 output terminal has two independent relay change-over contacts, which can be used for switching mains current consumers. For each channel a switch enables selection between automatic, manual on, manual off. In automatic mode the logical state of an output bit switches the relay. For manual mode a 24 V supply is required for the Bus Coupler. The output state can be read by the controller.
Product status:
regular delivery
Product information
| Technical data | KM2642 |
|---|---|
| Number of outputs | 2 x change-over |
| Nominal voltage | 230 V AC (max. switching voltage 250 V AC) |
| Switching capacity | max. 1.5 kVA |
| Switching voltage max. | 250 V AC |
| Load type | ohmic, inductive, lamp load |
| Max. output current | 6 A per channel |
| Switching current | 6 A AC/4 A DC at 30 V DC |
| Minimum permitted load | 100 mA at 12 V |
| Lamp test, electronic ballast | max. 10 A starting current |
| Current consumption power contacts | – |
| Current consumption K-bus | typ. 130 mA |
| Contact material | AgSnO2 |
| Bit width in the process image | 2 inputs (relay ON/OFF), 2 outputs |
| Operating cycles | 106 |
| Operating cycles mech. (min.) | 1 x 106 |
| Operating cycles electr. (min.) | 1 x 105 (3 A/250 V AC) |
| Configuration | no address or configuration setting |
| Special features | manual/automatic operation |
| Weight | approx. 110 g |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE |
| Housing data | KL-24 |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 24 mm x 100 mm x 52 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | – |
| Wiring | specific push-in connection |
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use