EL2522 | EtherCAT Terminal, 2-channel pulse train output, incr. enc. simulation, RS422, 50 mA
Signal LED A1
Signal LED C1
Signal LED A2
Signal LED B2
+24 V
EL2522 | EtherCAT Terminal, 2-channel pulse train output, incr. enc. simulation, RS422, 50 mA
Exact current control and synchronization of LED lamps
Distributed Clocks: the integrated time management system in EtherCAT
The EL2522 incremental encoder simulation terminal (pulse train) outputs a frequency-modulable signal on two channels with four outputs. The signal can be used to control motor drivers or other signal receivers, which are controlled by single cycles. The pulse sequence and pulse number can be specified directly via the process data in the frequency. Alternatively, the integrated path control can be used. For each channel the operating mode (frequency modulation, pulse/direction specification and incremental encoder simulation) can be selected. In addition, the EtherCAT Terminal can control three output channels in the ABC encoder simulation.
Special features:
- Pulse train (frequency output), RS422
- Different operating modes
- Frequency modulation
- Pulse direction setting
- Incremental encoder simulation (1x ABC, 2x AB)
- Integrated path control
- Synchronized operation through distributed clocks XFC technology possible
Product status:
regular delivery
Product information
| Technical data | EL2522 |
|---|---|
| Connection technology | pulse train (frequency output) |
| Number of outputs | 2 channel A/B, 1 channel A/B/C (4 differential outputs) |
| Distributed clocks | yes |
| Output specification | RS422, differential, 50 mA, min. 120 Ω load |
| Short-circuit current | short-circuit proof |
| Base frequency | 0…4 MHz, 50 kHz default |
| Resolution | 16 bit (incl. sign, scaled via the set frequency range) |
| Current consumption E-bus | typ. 120 mA |
| Power supply | via the E-bus |
| Electrical isolation | 500 V (E-bus/field potential) |
| Current consumption power contacts | typ. 50 mA (load-dependent) |
| Special features | pulse output with variable frequency: frequency modulation, pulse direction specification, 1 x ABC or 2 x AB incremental encoder simulation with connection to TwinCAT NC, ramp function, travel distance control |
| Weight | approx. 50 g |
| Operating/storage temperature | -25…+60°C/-40…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, UL |
| Housing data | EL-12-16pin |
|---|---|
| Design form | HD (High Density) housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxx series |
| Wiring | solid conductors (s): direct plug-in technique; fine-stranded conductors (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…1.5 mm², st*: 0.25…1.5 mm², f*: 0.14…0.75 mm² |
| Connection cross-section AWG | s*: AWG28…16, st*: AWG22…16, f*: AWG26…19 |
| Stripping length | 8…9 mm |
| Current load power contacts | Imax: 10 A |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use