EK1110-0043 | EtherCAT EJ coupler, CX and EL terminal connection
EK1110-0043 | EtherCAT EJ coupler, CX and EL terminal connection
EK1110-0043 | EtherCAT EJ coupler, CX and EL terminal connection
EK1110-0043 | EtherCAT EJ coupler, CX and EL terminal connection
EK1110-0043 | EtherCAT EJ coupler, CX and EL terminal connection
EK1110-0043 | EtherCAT EJ coupler, CX and EL terminal connection
Efficient series machine manufacturing: plug-and-play in the control cabinet
EtherCAT plug-in modules: Bus Terminals for circuit boards
The EK1110-0043 EtherCAT EJ Coupler connects the compact Embedded PCs from the CX series and the attached EtherCAT Terminals with the EtherCAT plug-in modules on an application-specific circuit board (signal distribution board).
Special features:
- Connection technology: 1 x connector at the rear of the EtherCAT EJ Coupler
- Forwarding of E-bus signals and field supply to the signal distribution board
The E-bus signals and the supply voltage of the field side UP are routed directly to the signal distribution board via a plug connector at the rear of the EtherCAT EJ Coupler. Thanks to the direct coupling of the Embedded PC and EtherCAT terminals with the EtherCAT plug-in modules on the PCB, no EtherCAT extension (EK1110) or EtherCAT Coupler (EJ1100) is required. The system and field supply of the EK1110-0043 is provided by the power supply unit of the Embedded PC.
The Embedded PC can be extended with EtherCAT Terminals that are not yet available in the EJ system, for example. The pre-assembled subsystem, consisting of a printed circuit board with mounted DIN rail, Embedded PC and EtherCAT plug-in modules, can be tested in advance and subsequently integrated into the machine assembly as a complete unit.
Product status:
regular delivery
Product information
| Technical data | EK1110-0043 |
|---|---|
| Task within EtherCAT system | forwarding of E-bus signals to the signal distribution board (EJ board) |
| Data transfer medium | PCB tracks on the signal distribution board |
| Data transfer rates | 100 Mbit/s |
| Bus interface | plug connector on the rear side of the EtherCAT EJ coupler |
| Power supply | from E-bus, Embedded PC power supply module |
| Current consumption E-bus | typ. 50 mA |
| Electrical isolation | 500 V (supply voltage/Ethernet) |
| Weight | approx. 50 g |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Protect. rating/installation pos. | IP20/see documentation |
| Approvals/markings | CE |
| Housing data | EK-44-8pin |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 44 mm x 100 mm x 68 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxx series |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use