The supplement products enable the basic TwinCAT packages to be customized with additional functions.
- Reset all filter values
- Results: 51
TS1500 | TwinCAT Valve Diagram Editor
- Description:
- graphical tool for designing the characteristic curve of a hydraulic valve
TS3900 | TwinCAT Solar Position Algorithm
- Description:
- license for using the PLC library TwinCAT Solar Position Algorithm
TS4100 | TwinCAT PLC Controller Toolbox
- Description:
- license for using the PLC library TwinCAT Controller Toolbox
TS4110 | TwinCAT PLC Temperature Controller
- Description:
- IEC 61131-3 software library for TwinCAT PLC for temperature control
TS5050 | TwinCAT NC Camming
- Description:
- IEC 61131-3 software library for TwinCAT PLC, implements camshaft functions (table coupling)
TS5055 | TwinCAT NC Flying Saw
- Description:
- IEC 61131-3 software library for TwinCAT, realizes a “flying saw”
TS5060 | TwinCAT NC FIFO Axes
- Description:
- IEC 61131-3 software library for TwinCAT, permits a specified FIFO set value generation
TS5065 | TwinCAT PLC Motion Control XFC
- Description:
- license for using the PLC library TwinCAT PLC Motion Control XFC
TS511x | TwinCAT Kinematic Transformation
- Description:
- license for using the TwinCAT PLC library for the realization of different kinematic transformations for TwinCAT PTP or TwinCAT NC I
TS5210 | TwinCAT CNC E
- Description:
- license for using the CNC path control software based on TwinCAT PLC or TwinCAT NC PTP
TS5220 | TwinCAT CNC Axes Pack
- Description:
- expansion to a total of 64 axes/controlled spindles, of which a maximum of 32 can be path axes and a maximum of 12 can be controlled spindles
TS5230 | TwinCAT CNC Channel Pack
- Description:
- 1 further CNC channel, expandable to a maximum of 12 channels, channel synchronization, axis transfer between channels
TS5240 | TwinCAT CNC Transformation
- Description:
- transformation functionality (5-axis functionality), kinematics selection from kinematics library, RTCP function, TLC function, definition of various coordinate systems, linking/transition of coordinate systems
TS5250 | TwinCAT CNC HSC
- Description:
- velocity and acceleration control across blocks for optimum utilization of axis dynamics for higher path velocities, maximum surface quality through smoothed dynamics, control of specified contour tolerances
TS5260 | TwinCAT CNC Spline Interpolation
- Description:
- path programming via splines with programmable spline type, Akima spline, B-spline
TS5270 | TwinCAT CNC Virtual NCK Basis
- Description:
- virtual TwinCAT CNC for simulation in a Windows environment
TS5271 | TwinCAT CNC Virtual NCK Options
- Description:
- virtual TwinCAT CNC for simulation in a Windows environment
TS5800 | TwinCAT Digital Cam Server
- Description:
- license for using the TwinCAT Digital Cam Server
TS5810 | TwinCAT PLC Hydraulic Positioning
- Description:
- IEC 61131-3 software library for TwinCAT PLC for controlling hydraulic axes
TS6100 | TwinCAT OPC UA Server
- Description:
- access to TwinCAT in accordance with OPC UA with UA server (DA/HA/AC) and UA client (DA)
TS622x | TwinCAT EtherCAT Redundancy
- Description:
- license for extending the TwinCAT EtherCAT master with cable redundancy capability
