ZK4500-0023-xxxx | Motor connection cable 1.5 mm² with M23 plug, drag-chain suitable (service phase)
Contact assembly
ZK4500-0023-xxxx | Motor connection cable 1.5 mm² with M23 plug, drag-chain suitable (service phase)
Contact assembly
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 87 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + 2 x (2 x 0.75 mm²)),
from 25 m motor choke required.
The cable is UL and CSA listed.
suitable for:
- AL2xxx
- AL3xxx
- AM3000 (up to winding code L)
- AX5000 (1.5…12 A)
Product status:
service phase
Product information
| Technical data | Head A |
|---|---|
| Installation size | M23 |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 8-pin |
| Wire termination | crimp connection |
| Body color | metal |
| Technical data | Head B |
|---|---|
| Installation size | Pitch dimension 7.62 mm |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 4-pin |
| Wire termination | Clamping yoke connection |
| Max. wire cross-section | AWG24 ... AWG8 (0.2 mm² ... 10 mm²) |
| Body color | black, similar to RAL 9011 |
| Technical data | Head C |
|---|---|
| Installation size | Pitch dimension 3.50 mm |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 5-pin |
| Wire termination | Clamping yoke connection |
| Max. wire cross-section | AWG28 ... AWG14 (0.2 mm² ... 1.5 mm²) |
| Body color | black, similar to RAL 9011 |
| Technical data | Meterware |
|---|---|
| Cross-section (power) | 1.50 mm² (approx. AWG16) |
| Cross-section (signal) | 0.75 mm² (approx. AWG18) |
| Use | drag-chain suitable |
| Material jacket | PUR (polyurethane) |
| Outer cable diameter | 12.4 mm ± 0.3 mm (0.4882" ± 0.0118") |
| Jacket color | orange |
| A1 | 79.00 mm |
| A2 | 28.00 mm |
| B1 | 45.00 mm |
| B2 | 45.00 mm |
| C1 | 19.00 mm |
| C2 | 25.00 mm |
| Ordering information | Length |
|---|---|
| ZK4500-0023-xxxx | xxxx = cable length in decimeters |
| xxxx = 0050 | example for 5 m length |
| ZK4502-0023-xxxx | motor cable ≥ 25 m if motor choke is required |
| sold by the meter, admissible total cable length see documentation of Servo Drive |
© Beckhoff Automation 2024 - Terms of Use