ZK4800-8525-xxxx | Motor connection cable 4 mm² with M40 speedtec® plug system, drag-chain suitable
ZK4800-8525-xxxx | Motor connection cable 4 mm² with M40 speedtec® plug system, drag-chain suitable
Contact assembly
Highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 111 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 4 mm² + (2 x 1 mm²) + (2 x AWG22)).
The cable is UL and CSA listed.
Suitable for:
- AM8x6x (from winding code Q)
- AM807x
- AL8000
- AX8525
Product status:
regular delivery
Product information
| Technical data | Head A |
|---|---|
| Installation size | M40 |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | Power: 4+PE, Signal: 4, Data: 2 |
| Mating cycles | 500 |
| Wire termination | crimp connection |
| Technical data | Head B |
|---|---|
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 4-pin |
| Mating cycles | 25 |
| Wire termination | Clamping yoke connection |
| Max. wire cross-section | AWG22…AWG4 |
| Technical data | Head C |
|---|---|
| Installation size | Pitch dimension 3.50 mm |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 5-pin |
| Mating cycles | 25 |
| Wire termination | Clamping yoke connection |
| Max. wire cross-section | AWG28 ... AWG14 (0.2 mm² ... 1.5 mm²) |
| Technical data | Cable by meter |
|---|---|
| Length | sold by the meter |
For further technical details, please refer to the data sheet.
| A1 | 100.00 mm |
| A2 | 46.00 mm |
| B1 | 137.00 mm |
| B2 | 52.00 mm |
| C1 | 19.00 mm |
| C2 | 25.00 mm |
| Ordering information | Length |
|---|---|
| ZK4800-8525-xxxx | xxxx = cable length in decimeters |
| xxxx = 0050 | example for 5 m length |
| sold by the meter, admissible total cable length see documentation of Servo Drive |
Loading content ...
© Beckhoff Automation 2025 - Terms of Use