AG3400-+NPT005S-MF1-4 | Economy planetary gear units with output flange, size 005
AG3400-+NPT005S-MF1-4 | Economy planetary gear units with output flange, size 005
The planetary gear units with output flange in the AG3400 economy series are a cost-efficient alternative to the high-end AG2400 gears. The gears, which are available in 1-stage and 2-stage versions, are compatible in their mating dimensions with those of the high-end AG2400 series and enable the user to implement applications with lower demands on dynamics, torque and accuracy in a very cost-effective manner. The AG3400 series is available in standard and high-torque versions for rotary servomotors. The gear ratios are finely scalable and range from 3 to 100.
Features
- equipped with output flange
- standard version for applications with high positioning accuracy in dynamic cyclical operation; high-torque version for high-torque applications
- 5 sizes with up to 21 gear ratios
- acceleration torques from 18 to 700 Nm
- high efficiency and high power density
- high radial and axial forces with low torsional backlash
- lubricated for life
- IP64 protection rating; any installation position
- integrated into TwinCAT 3 Motion Designer for optimal specification
Product status:
regular delivery
Product information
| Technical data | AG3400-+NPT005S-MF1-4 |
|---|---|
| Design | straight |
| Variant | economy |
| Version | standard MF |
| Nominal output torque | 5.1 Nm |
| Max. acceleration torque | 18 Nm |
| Gear stages | 1 |
| Gear ratio | 4 |
| Max. torsional backlash standard/reduced | ≤ 10 arcmin |
| Ambient temperature (operation) | -15…+40 °C |
| Housing data | AG3400 |
|---|---|
| Protection rating | IP64 |
| Design form | planetary gear with output flange |
| Coating/surface | anodized, heat-treated steel |
| Order reference | AG3400-+NPTaaaS-MFs-i-1X1-Motorsize |
|---|---|
| aaa | series/size (005, 015, 025, 035, 045) |
| s = 1 | 1-stage with i = 3/4/5/7/8/10 |
| s = 2 | 2-stage with i = 9/12/15/16/20/25/28/30/32/35/40/50/64/70/100 |
| i | gear ratio |
| w = 0 | flange |
| X | identifying letter for clamping hub diameter; not available for selection, is selected automatically based on the respective motor. |
| y = 1 | standard torsional backlash |
| Motorsize | Specifies adapter unit between motor and gearbox. Correlates to motor flange code F or flange compatible motor type. |
| Motorsize = F1 | flange code F1: AM801x, AM811x |
| Motorsize = F2 | flange code F2: AM802x, AM812x, AMI812x |
| Motorsize = F3 | flange code F3: AM803x, AM813x, AM853x, AMI813x, AMP803x, AMP853x |
| Motorsize = F4 | flange code F4: AM804x, AM814x, AM854x, AMP804x, AMP854x |
| Motorsize = F5 | flange code F5: AM805x, AM835x, AM855x, AMP805x, AMP855x |
| Motorsize = F6 | flange code F6: AM806x, AM836x, AM856x |
| Motorsize = F7 | flange code F7: AM807x, AM837x |
| high torque version on request |
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use