PS3001-2420-0001 | Power supply PS3000; output: 24 V DC, 20 A; input: AC 100…240 V/DC 110…150 V, 1-phase
PS3001-2420-0001 | Power supply PS3000; output: 24 V DC, 20 A; input: AC 100…240 V/DC 110…150 V, 1-phase
Power supplies for 24 V and 48 V DC
The power supply PS3001-2420-0001 is a 1-phase, 24 V DC power supply with an output current of 20 A and an output power of 480 W. On the input side, the device has a wide range input, an active power factor correction (PFC) and an inrush current surge regulation. The output operates according to the UI characteristic curve and switches to safe hiccup mode in case of overload/short circuit.
The PS3001-2420-0001 has an extra power with a maximum output power of 150% for 4 seconds and can precisely trigger fuses with short-term peak current. The power supply belongs to the PS3000 family and has a width of 82 mm. A DC OK LED, an overload LED and a potential-free relay contact monitor the status of the output voltage.
The power supply is DNV approved and can therefore be used in shipbuilding, for example.
Product status:
regular delivery
Product information
| Technical data | PS3001-2420-0001 |
|---|---|
| Input voltage | AC 100…240 V, DC 110…150 V |
| Wide-range input | yes |
| Input current | typ. 2.48 A at 230 V AC |
| Switch-on current limiter | yes |
| Mains frequency | 50…60 Hz |
| Starting current | typ. 7 A peak at 230 V AC |
| Harmonic correction (PFC) | active |
| Output voltage | 24 V DC |
| Adjustment range | 24…28 V DC |
| Output current | 20 A |
| Output | 480 W |
| Outpout power for 4 s | 720 W |
| Extra power | 50%/4 s |
| Precise fuse release | yes |
| DC OK LED | yes |
| Overload LED | yes |
| Efficiency | approx. 93.9% |
| Operating temperature | -25…+70°C |
| Shock resistance | conforms to EN 60068-2-27 |
| Vibration resistance | conforms to EN 60068-2-6 |
| Weight | approx. 1200 g |
| Approvals/markings | CE, UL508, DNV, SEMI F47 |
| Protection rating | IP20 |
| Housing data | Power supply |
|---|---|
| Dimensions (W x H x D) | 82 mm x 124 mm x 127 mm |
| Material | aluminum |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Wiring | spring-loaded technique |
| Connection cross-section | input/output: e*: 0.5…6 mm², f*: 0.5…4 mm², a*: 0.5…4 mm² signal contact: e*: 0.3…4 mm², f*: 0.3…2.5 mm², a*: 0.3…2.5 mm² |
| Connection cross-section AWG | Input/Output: AWG20-10 Signal contact: AWG26-12 |
| Stripping length | input/output: 10 mm, signal contact: 6 mm |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use