KL1702 | Bus Terminal, 2-channel digital input, 120…230 V AC, 10 ms
120 V/230 V
KL1702 | Bus Terminal, 2-channel digital input, 120…230 V AC, 10 ms
The KL1702 digital input terminal acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. The direct connection of 120 V/230 V AC signals is possible. The Bus Terminal contains two channels that indicate its signal state by means of light emitting diodes.
Special features:
- direct connection of 120 V/230 V AC signals
- for AC voltage
In addition to the KL1702, there is the KL1702-0010 version with a 230 V AC input circuit and type 2 input characteristic.
Product status:
regular delivery
Product information
| Technical data | KL1702 |
|---|---|
| Connection technology | 4-wire |
| Number of inputs | 2 |
| Nominal voltage | 120/230 V AC |
| “0” signal voltage | 0…40 V |
| “1” signal voltage | 79…260 V |
| Input filter | typ. 10 ms |
| Input current | > 3 mA, typ. 6 mA |
| Current consumption K-bus | typ. 3 mA |
| Switching times | 10 ms |
| Electrical isolation | 500 V (K-bus/mains voltage); 3750 V AC, 1 min. |
| Bit width in the process image | 2 inputs |
| Configuration | no address or configuration setting |
| Special features | ohmic/capacitive input behavior |
| Weight | approx. 60 g |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring | for all KSxxxx Bus Terminals |
| Approvals/markings | CE, UL, ATEX, IECEx, DNV GL |
| Ex marking | ATEX: II 3 G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc |
| Housing data | KL-12-8pin | KS-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| KL1702 | Bus Terminal, 2-channel digital input, 120…230 V AC, 10 ms |
| KS1702 | Bus Terminal, 2-channel digital input, 120…230 V AC, 10 ms, pluggable wiring |
| KL1702-0010 | Bus Terminal, 2-channel digital input, 120…230 V AC, 10 ms, type 2 |
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use