ZK4540-0020-xxxx | Connection cable for thermal protection cables 0.14 mm², drag-chain suitable (service phase)
Contact assembly
ZK4540-0020-xxxx | Connection cable for thermal protection cables 0.14 mm², drag-chain suitable (service phase)
Contact assembly
Highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 38 mm (7 x OD), max. drag-chain length horizontal = 20 m, vertical = 5 m,
(2 x 2 x 0.14 mm²)
suitable for:
- AL2xxx
- AX5000
Product status:
service phase
Product information
| Technical data | Head A |
|---|---|
| Installation size | D-sub |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 9-pin |
| Wire termination | solder connection |
| Body color | metal |
| Technical data | Head B |
|---|---|
| Installation size | Pitch dimension 3.50 mm |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 5-pin |
| Wire termination | Clamping yoke connection |
| Max. wire cross-section | AWG28 ... AWG14 (0.2 mm² ... 1.5 mm²) |
| Body color | black, similar to RAL 9011 |
| Technical data | Meterware |
|---|---|
| Cross-section | 2 x 2 x 0.14 mm² |
| Use | drag-chain suitable |
| Material jacket | PUR (polyurethane) |
| Outer cable diameter | 5.4 mm ± 0.2 mm (0.213" ±0.0079") |
| Jacket color | green |
| A1 | 43.00 mm |
| A2 | 32.00 mm |
| B1 | 19.00 mm |
| B2 | 25.00 mm |
| Ordering information | Length |
|---|---|
| ZK4540-0020-xxxx | xxxx = cable length in decimeters |
| xxxx = 0050 | example for 5 m length |
| sold by the meter, admissible total cable length see documentation of Servo Drive |
© Beckhoff Automation 2024 - Terms of Use