ZK4800-8062-xxxx | Motor connection cable 1 mm² with itec® plug, torsionable
Contact assembly
ZK4800-8062-xxxx | Motor connection cable 1 mm² with itec® plug, torsionable
Contact assembly
highly flexible, torsion-resistant cable with 2 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 144 mm (12 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22)).
The cable is UL and CSA listed.
Suitable for.
- AM801x
- AM802x
- AM803x
- AM853x
- AL8000
- AX8108
- AX8206
Product status:
regular delivery
Product information
| Technical data | Head A |
|---|---|
| Installation size | itec® (Series 915) |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | Power: 3+PE, Signal: 5 |
| Wire termination | crimp connection |
| Body color | black, similar to RAL 9011 |
| Technical data | Head B |
|---|---|
| Installation size | Pitch dimension 7.62 mm |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 4-pin |
| Wire termination | Push-in |
| Max. wire cross-section | AWG24 ... AWG8 (0.5 mm² ... 10 mm²) |
| Body color | black, similar to RAL 9011 |
| Technical data | Meterware |
|---|---|
| Cross-section (power) | 1.00 mm² (approx. AWG18) |
| Cross-section (signal) | AWG22 (approx. 0.34 mm²) |
| Use | suitable for torsion/robotic application |
| Material jacket | TPU (thermoplastic polyurethane) |
| Outer cable diameter | 12.0 mm ± 0.2 mm (0.472" ± 0.0079") |
| Jacket color | orange |
For further technical details, please refer to the data sheet.
| A1 | 44.00 mm |
| A2 | 19.00 mm |
| B1 | 60.00 mm |
| B2 | 47.00 mm |
| Ordering information | Length |
|---|---|
| ZK4800-8062-xxxx | xxxx = cable length in decimeters |
| xxxx = 0050 | example for 5 m length |
| sold by the meter, admissible total cable length see documentation of Servo Drive |
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use