SoltarAdjuntarCerrar

Oficina central México
Beckhoff Automation, S.A. de C.V.

Boulevard Manuel Ávila Camacho 2610, Torre B, Piso 9, Colonia Valle de los Pinos, Tlalnepantla de Baz
Estado de México CP 54040, México

+52 55 75998058
mexico@beckhoff.com
www.beckhoff.com/es-mx/

AM3084-wTyz-0006 | Servomotor 180 Nm (M0), AM308x (service phase)

AM3084-wTyz-0006 | Servomotor 180 Nm (M0), AM308x (service phase)

AM3084-wTyz-0006 | Servomotor 180 Nm (M0), AM308x (service phase)

AM3084-wTyz-0006 | Servomotor 180 Nm (M0), AM308x (service phase)

AM3084-wTyz-0006 | Servomotor 180 Nm (M0), AM308x (service phase)

The AM3084 low-inertia servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 400 V AC voltage range. The standstill torque of the motor is 180.0 Nm. The low-inertia servomotor with flange code F8 and motor length 4 has a shaft diameter b = 48 k6 and a free shaft end of d = 110 mm.

Product status:

regular delivery (not recommended for new projects)

Product information

Data for 400 V ACAM3084-wTyz-0006
Motor typesynchronous servomotors
Nominal voltage480 V AC
Standstill torque180 Nm
Rated torque105 Nm
Peak torque668 Nm
Rated speed1800 min-1
Rated power19.8 kW
Standstill current67 A
Peak current335 A
Torque constant2.68 Nm/A
Rotor moment of inertia495 kgcm²
Motor feedbackresolver, BiSS B, EnDat 2.1
Coolingconvection
Connection methodterminal box
Ambient temperature (operation)+5…+40 °C
Approvals/markingsCE, cURus, EAC

All electric quantities are RMS values.

Options such as shaft seal, holding brake, absolute encoder can lead to a reduction of the nominal rating.

Housing dataAM30xx
Protection ratingIP54
Design formflange-mounted according to IM B5, IM V1, IM V3
Materialaluminum die-cast
Coating/surfacecoated
DimensionsAM3084-wTyz-0006
a250 j6
b48 k6
d110 mm
l300 mm
r260 mm
k (encoder) (without brake)424.4 mm
k (encoder) (with brake)490.4 mm
k (resolver) (without brake)424.4 mm
k (resolver) (with brake)490.4 mm
Order reference
AM3084-wTyz-0006
uflange code
vmotor length
w = 0smooth shaft (standard)
w = 1shaft with groove and feather key according to DIN 6885
w = 2shaft with IP65 sealing ring and smooth shaft (AM301x to AM303x)
w = 2shaft with IP65 sealing ring and smooth shaft (AM304x to AM308x)
w = 3shaft with IP65 sealing ring and shaft with groove and feather key (AM301x to AM303x)
w = 3shaft with IP65 sealing ring and shaft with groove and feather key (AM304x to AM308x)
xwinding code A…T
y = 0resolver, 2-pole
y = 1single-turn absolute encoder, EnDat 2.1, absolute position within one revolution, electronic identification plate, AM302x…AM304x: 512 sine periods per revolution, AM305x…AM308x: 2048 sine periods per revolution
y = 2multi-turn absolute encoder, EnDat 2.1, absolute position within 4096 revolutions, electronic identification plate, AM302x…AM304x: 512 sine periods per revolution, AM305x…AM308x: 2048 sine periods per revolution
y = 3single-turn absolute encoder, BiSS, absolute position within one revolution, electronic identification plate, AM302x…AM308x: 2048 sine periods per revolution
y = 4multi-turn absolute encoder, BiSS, absolute position within 4096 revolutions, electronic identification plate, AM302x…AM308x: 2048 sine periods per revolution
y = Asingle-turn absolute encoder, Hiperface, absolute position within one revolution, electronic identification plate, AM301x: 16 sine periods per revolution
y = Bmulti-turn absolute encoder, Hiperface, absolute position within one revolution, electronic identification plate, AM301x: 4,096 sine periods per revolution
z = 0without holding brake
z = 1with holding brake for AM302x…AM308x
a = 0rotatable angular connectors for motor and feedback cable (only for AM302x up to AM307x)
a = 1supply cable 0.5 m with non-detachable plugs (only for AM301x/AM302x), only for resolver (y = 0)
a = 3vertical connectors for motor and feedback cables (only for AM302x up to AM307x)
a = 5yTec plug (only for AM301x)
a = 6motor connection via terminal box (only for AM308x)
The options cannot be installed in the field. Options such as shaft seal, holding brake, absolute encoder can lead to a reduction of the nominal rating.

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use