PS2001-2410-0000 | Power supply PS2000; output: 24 V DC, 10 A; input: AC 100…240 V/DC 110…150 V, 1-phase
PS2001-2410-0000 | Power supply PS2000; output: 24 V DC, 10 A; input: AC 100…240 V/DC 110…150 V, 1-phase
Power supplies for 24 V and 48 V DC
The power supply PS2001-2410-0000 is a single-phase, 24 V DC power supply with an output current of 10 A and an output power of 240 W. On the input side, the device has a wide range input, a power factor correction (PFC) and an inrush current surge regulation. The output operates according to the UI characteristic curve and switches to safe hiccup mode in case of overload/short circuit.
The PS2001-2410-0000 has an extra power with a permanent, maximum output power of 120% and can precisely trigger fuses with short-term peak current. The power supply belongs to the PS2000 family and has a width of 39 mm. A DC OK LED and a potential-free relay contact monitor the status of the output voltage.
Due to approvals in the process industry (ATEX/IECEx), shipbuilding (DNV) and semiconductor industry (SEMI F47), the power supply can be used in a wide range of applications.
Product status:
regular delivery
Product information
| Technical data | PS2001-2410-0000 |
|---|---|
| Input voltage | AC 100…240 V, DC 110…150 V |
| Wide-range input | yes |
| Input current | typ. 1.13 A at 230 V AC |
| Switch-on current limiter | yes |
| Mains frequency | 50…60 Hz |
| Starting current | typ. 6 A peak at 230 V AC |
| Harmonic correction (PFC) | active |
| Output voltage | 24 V DC |
| Adjustment range | 24…28 V DC |
| Output current | 10 A |
| Output | 240 W |
| Extra power | 20% (continuously) |
| Precise fuse release | yes |
| DC OK LED | yes |
| Efficiency | approx. 95.2% |
| Operating temperature | -25…+70°C |
| Shock resistance | conforms to EN 60068-2-27 |
| Vibration resistance | conforms to EN 60068-2-6 |
| Weight | approx. 600 g |
| Approvals/markings | CE, UL, ATEX, IECEx, Class I Div2, DNV, SEMI F47, CCC |
| Protection rating | IP20 |
| Housing data | Power supply |
|---|---|
| Dimensions (W x H x D) | 39 mm x 124 mm x 117 mm |
| Material | aluminum |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Wiring | input/output: screw type connection,
signal contact: push-in technique |
| Connection cross-section | input/output: e*: max. 6 mm², f*: max. 4 mm², a*: max. 4 mm² signal contact: e*: max. 1.5 mm², f*: max. 1.5 mm², a*: max. 1.5 mm² |
| Max. cable diameter with end sleeve | Input/Output: 2.8 mm, Signal contact: 1.6 mm |
| Connection cross-section AWG | Input/Output: AWG20-10 Signal contact: AWG24-16 |
| Stripping length | 7 mm |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use