EL3078 | EtherCAT Terminal, 8-channel analog input, multi-function, ±10 V, ±20 mA, 16 bit, single-ended, 2 ksps
CH1...8
+24 V
EL307x, EL4x7x: The new generation of multi-functional analog terminals
EL3078 | EtherCAT Terminal, 8-channel analog input, multi-function, ±10 V, ±20 mA, 16 bit, single-ended, 2 ksps
EL307x, EL4x7x: The new generation of multi-functional analog terminals
A new generation of Beckhoff analog I/Os
The EL3072, EL3074, and EL3078 analog input terminals record 10 V / 20 mA standard signals with 16-bit resolution and up to 2000 measured values per second. Each channel can be parameterized individually via the controller/TwinCAT; signals in the range of -10…+10 V, 0…+10 V, -20…+20 mA, 0…+20 mA, and 4…+20 mA can be processed by each channel. In terms of electrics, the voltage and current signals must be connected to different terminal points. The voltage and current inputs are single-ended, which means that one connection point of each channel is already connected in the terminal to +24 V or GND and no longer needs to be wired separately. With a technical measuring range of ±107% of the nominal range, the terminals also support commissioning with sensor values in the limit range and the evaluation according to NAMUR NE43.
Product status:
regular delivery
Product information
| Technical data | Analog input |
|---|---|
| Number of inputs | 8 |
| Function | voltage measurement, power measurement |
| Wiring | 2-wire |
| Ground reference (input) | single-ended |
| Max. sampling rate | min. 500 µs (max. 2 ksps) per channel |
| Sampling type | multiplex, approx. 60 µs delay between. Ch1/2 |
| Internal resistance | voltage: typ. > 200 kΩ, current: typ. 100 Ω |
| Input filter limit frequency | 1.2 kHz |
| Rise time | 3 ms typ. (0…90%) |
| Dielectric strength | max. 30 V (voltage and current measurement) |
| Overcurrent protection | typ. < 50 mA |
| Measuring range, nominal | -10/0…+10 V | -20/0/+4…+20 mA |
| Measuring range, technical | -10.73…+10.73 V | -21.47…+21.47 mA |
| Resolution | 16 bit (incl. sign) |
| Measurement error/uncertainty | < ±0.3% (relative to full scale value) |
| Electrical isolation channel/channel | no |
| Technical data | General |
|---|---|
| Power supply | via the E-bus |
| Distributed clocks | – |
| Electrical isolation | channel/E-bus: functional separation 707 V DC type test |
| Current consumption E-bus | typ. 90 mA |
| Special features | U/I parameterizable, ExtendedRange 107 %, standard and compact process image, FIR/IIR filter activatable |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Weight | approx. 65 g |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Approvals/markings | CE |
| Protect. rating/installation pos. | IP20/variable |
| Housing data | EL-12-16pin |
|---|---|
| Design form | HD (High Density) housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxx series |
| Wiring | solid conductors (s): direct plug-in technique; fine-stranded conductors (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…1.5 mm², st*: 0.25…1.5 mm², f*: 0.14…0.75 mm² |
| Connection cross-section AWG | s*: AWG28…16, st*: AWG22…16, f*: AWG26…19 |
| Stripping length | 8…9 mm |
| Current load power contacts | Imax: 10 A |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use