EL2798 | EtherCAT Terminal, 8-channel solid state relay output, 30 V AC, 48 V DC, 2 A, potential-free
1…8
+24 V
EL2798 | EtherCAT Terminal, 8-channel solid state relay output, 30 V AC, 48 V DC, 2 A, potential-free
The digital EL2798 EtherCAT Terminal provides eight switches that can be used like a relay contact for AC/DC voltages. The electronic switch is realized through high-performance MOSFET transistors with low on-resistance. The switch itself is not short-circuit-proof, but thanks to its high pulse current capability it can cope with current until an external fuse is triggered. The wear resistance increases the availability of the application. Ohmic and slightly inductive loads can be switched up to a rated voltage of 30 V AC/DC. Purely ohmic loads can be switched up to 48 V DC rated voltage. High peak voltages and electromagnetic interference pulses are prevented. The EL2798 features potential-free contacts; the power contacts are passed through.
Special features:
- 8 x make contacts as substitutes for relay contacts
- Switching of ohmic loads up to a rated voltage of 30 V AC/48 V DC
- Switching of slightly inductive loads up to a rated voltage of 30 V AC/DC
- Max. output current of 2 A per channel (∑ 10 A)
- potential-free
Product status:
regular delivery
Product information
| Technical data | EL2798 |
|---|---|
| Connection technology | 2-wire |
| Number of outputs | 8 x make contacts |
| Nominal voltage | 0…30 V AC/DC (ohmic load only: 0…48 V DC) |
| Distributed clocks | – |
| Max. output current | 2 A per channel (∑ 10 A) |
| Short-circuit current | not short-circuit proof, see peak current |
| Reverse voltage protection | – |
| Switching times | TON: typ. 1.8 ms, TOFF: typ. 30 ms |
| Breakdown voltage | 80 V |
| Peak current | 5 A (100 ms), < 50 A (10 ms) |
| Isolation voltage (channel/channel) | < 200 V |
| Current consumption E-bus | typ. 140 mA |
| Switching on speed | typ. 1.8 ms, max. 5 ms |
| Switching off speed | typ. 30 ms, max. 50 ms |
| On-resistance | typ. 0.03 Ω |
| Electrical isolation | 500 V (E-bus/field potential) |
| Special features | substitute for relay contacts, potential-free |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, UL, DNV GL |
| Housing data | EL-12-16pin |
|---|---|
| Design form | HD (High Density) housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxx series |
| Wiring | solid conductors (s): direct plug-in technique; fine-stranded conductors (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…1.5 mm², st*: 0.25…1.5 mm², f*: 0.14…0.75 mm² |
| Connection cross-section AWG | s*: AWG28…16, st*: AWG22…16, f*: AWG26…19 |
| Stripping length | 8…9 mm |
| Current load power contacts | Imax: 10 A |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use