AG2250-+PLE60-M03-80 | 3-stage planetary gear units for rotary servomotors
AG2250-+PLE60-M03-80 | 3-stage planetary gear units for rotary servomotors
The AG2250 planetary gears are especially matched to the rotary motor series and have been expanded by 2- or 3-stage version. For better design, planetary and angled planetary gears are available with different transmission ratios.
The 1-stage variants of the (W)PLE60 and (W)PLE80 sizes are ideally suited for the AS2000 stepper motor series.
The AG2250 series completes the range of small, affordable drive technology products. The gears are especially suited to applications where no particularly low torsional backlash is required. The inertia ratios, the required torques and the suitable motors can be conveniently calculated directly in TwinCAT with the TwinCAT 3 Motion Designer. In addition, the tool checks in a single step whether the selected motor can be adapted to the gear unit. The planetary gear units are fitted to the respective motor in the factory and delivered as a complete motor/gear unit. The AG2250 series also contains angled planetary gears for space-saving installation of motors at a right-angle.
Features
- low torsional backlash
- high output torques
- high efficiency
- 1-stage planetary gear, transmission ratios 3, 4, 5, 7, 8, 10
- 2-stage planetary gear/angled planetary gear, transmission ratios 9, 12, 15, 16, 20, 25, 32, 40, 64
- 3-stage planetary gear/angled planetary gear, transmission ratios 60, 80, 100, 120, 160, 200, 256, 320, 512
- 1-stage angled planetary gear, transmission ratios 3, 4, 5, 7, 8, 10
- 2-stage angled planetary gear, transmission ratios 9, 12, 15, 16, 20, 25, 32, 40, 64
- 3-stage angled planetary gear, transmission ratios 60, 80, 100, 120, 160, 200, 256, 320, 512
- flexible installation position
- lifetime lubrication
Product status:
regular delivery
Product information
| Technical data | AG2250-+PLE60-M03-80 |
|---|---|
| Design | straight |
| Variant | economy |
| Nominal output torque | 44 Nm |
| Max. acceleration torque | 70 Nm |
| Gear stages | 3 |
| Gear ratio | 80 |
| Max. torsional backlash standard/reduced | ≤ 15/– arcmin |
| Ambient temperature (operation) | -25…+40°C |
| Housing data | AG2250 |
|---|---|
| Protection rating | IP54 |
| Design form | flange-mounted according to B14 |
| Coating/surface | post-oxidized, heat-treated steel |
| Order reference | AG2250-+PLEaa-M0s-i-wXy-Motorsize |
|---|---|
| xPLEaa | series/size (PLE40, PLE60, PLE80, WPLE40, WPLE60, WPLE80) |
| s = 3 | 3-stage with i = 60/80/100/120/160/200/256/320/512 |
| i | gear ratio |
| w = 0 | smooth shaft |
| w = 1 | shaft with groove and feather key |
| X | identifying letter for clamping hub diameter; not available for selection, is selected automatically based on the respective motor |
| y = 1 | standard torsional backlash |
| Motorsize | Specifies adapter unit between motor and gearbox. Correlates to motor flange code F or flange compatible motor type. |
| Motorsize = F2 | flange code F2: AM802x, AM812x, AMI812x |
| Motorsize = F3 | flange code F3: AM813x, AM803x, AM853x, AMP803x, AMP853x |
| Motorsize = F4 | flange code F4: AM814x, AM804x, AM834x, AM854x, AMP804x, AMP854x |
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use