TwinCAT Motion includes scalable software packages for motion control. It includes modules ranging from a simple PTP (point-to-point) application to robotics and complex CNC applications. An abstraction layer to the hardware enables a very flexible control of a wide range of drive devices.
- Reset all filter values
- Results: 41
TF5000 | TwinCAT 3 NC PTP 10 Axes
- Description:
- TwinCAT 3 NC PTP enables point-to-point movements to be implemented in software; the axes are represented by axis objects and provide a cyclic interface for e.g. the PLC, the axis object is then linked to a corresponding physical axis
TF5010 | TwinCAT 3 NC PTP Axes Pack 25
- Description:
- extension of TwinCAT 3 NC PTP to a maximum of 25 axes
TF5020 | TwinCAT 3 NC PTP Axes Pack unlimited
- Description:
- extension of TwinCAT 3 NC PTP to 255 axes
TF5050 | TwinCAT 3 NC Camming
- Description:
- TwinCAT 3 NC Camming (cam plates) enables the modeling of a non-linear relationship between master and slave axes
TF5055 | TwinCAT 3 NC Flying Saw
- Description:
- TwinCAT 3 NC Flying Saw enables the coupling of a slave axis to a master axis in a specific synchronous position (flying saw)
TF5060 | TwinCAT 3 NC FIFO Axes
- Description:
- TwinCAT 3 NC FIFO Axes enables the output of externally generated position setpoints to an axis group
TF5065 | TwinCAT 3 Motion Control XFC
- Description:
- TwinCAT 3 Motion Control XFC enables time-accurate acquisition and switching of digital signals related to axis positions in conjunction with EtherCAT XFC terminals
TF5100 | TwinCAT 3 NC I
- Description:
- TwinCAT 3 NC I enables interpolating path movements with three path axes and up to five auxiliary axes, whereby master/slave couplings can also be formed
TF5110 | TwinCAT 3 Kinematic Transformation L1
- Description:
- TwinCAT 3 Kinematic Transformation L1 enables the control of various robot kinematics at level 1
TF5111 | TwinCAT 3 Kinematic Transformation L2
- Description:
- TwinCAT 3 Kinematic Transformation L2 enables the control of various robot kinematics at level 2
TF5112 | TwinCAT 3 Kinematic Transformation L3
- Description:
- TwinCAT 3 Kinematic Transformation L3 enables the control of various robot kinematics at level 3
TF5113 | TwinCAT 3 Kinematic Transformation L4
- Description:
- TwinCAT 3 Kinematic Transformation L4 enables the control of various robot kinematics at level 4
TF5120 | TwinCAT 3 Robotics mxAutomation
- Description:
- TwinCAT 3 Robotics mxAutomation allows direct communication between the PLC and a KUKA robot control via a common interface
TF5130 | TwinCAT 3 Robotics uniVAL PLC
- Description:
- TwinCAT 3 Robotics uniVAL PLC allows direct communication between the PLC and a Stäubli robot control via a common interface
TF5220 | TwinCAT 3 CNC Axes Pack 64
- Description:
- extension to up to a total of 64 axes/controlled spindles, of which a maximum of 32 can be path axes and a maximum of 12 can be controlled spindles
TF5221 | TwinCAT 3 CNC Axes Pack unlimited
- Description:
- extension to up to a total of 128 axes/controlled spindles, of which a maximum of 32 can be path axes and a maximum of 12 can be controlled spindles
TF5225 | TwinCAT 3 CNC Measurement
- Description:
- optional package of CNC cycles that supports the measurement of tools or workpieces directly on the machine
TF5230 | TwinCAT 3 CNC Channel Pack
- Description:
- further CNC channel, extension to a maximum of 32 channels, channel synchronization, axis transfer between channels
TF5240 | TwinCAT 3 CNC Transformation
- Description:
- transformation functionality (5-axis functionality)
TF5245 | TwinCAT 3 CNC Kinematic Optimization
- Description:
- optional CNC package that optimizes the determination of kinematic parameters for rotary axes in 5-axis kinematics
TF5250 | TwinCAT 3 CNC HSC Pack
- Description:
- extending the CNC with HSC technology (high-speed cutting)
TF5260 | TwinCAT 3 CNC Spline Interpolation
- Description:
- path programming via splines with programmable spline type, Akima-spline, B-spline
TF5261 | TwinCAT 3 CNC Realtime Cycles
- Description:
- allows concurrent execution of G code in the interpolation cycle of the TwinCAT CNC
