PS1021-2405-0000 | Power supply PS1000; output: 24 V DC, 5 A; input: AC 100…120/200…240 V, 1-phase
PS1021-2405-0000 | Power supply PS1000; output: 24 V DC, 5 A; input: AC 100…120/200…240 V, 1-phase
Power supplies for 24 V and 48 V DC
The power supply PS1021-2405-0000 is a single-phase, 24 V DC power supply with an output current of 5 A and an output power of 120 W. On the input side, the device has a wide range input and an inrush current surge regulation. The output operates according to the UI characteristic curve and switches to safe hiccup mode in case of overload/short circuit. The power supply belongs to the PS1000 family and has a width of 39 mm. A DC OK LED and a potential-free relay contact monitor the status of the output voltage.
Product status:
regular delivery
Product information
| Technical data | PS1021-2405-0000 |
|---|---|
| Input voltage | AC 100…120/200…240 V |
| Wide-range input | yes |
| Input current | typ. 1.05 A at 230 V AC |
| Switch-on current limiter | yes |
| Mains frequency | 50…60 Hz |
| Starting current | typ. 30 A peak at 230 V AC |
| Output voltage | 24 V DC |
| Adjustment range | 24…28 V DC |
| Output current | 5 A |
| Output | 120 W |
| DC OK LED | yes |
| Efficiency | approx. 92.3% |
| Operating temperature | -10…+70°C |
| Shock resistance | conforms to EN 60068-2-27 |
| Vibration resistance | conforms to EN 60068-2-6 |
| Weight | approx. 370 g |
| Approvals/markings | CE, UL61010 |
| Protection rating | IP20 |
| Housing data | Power supply |
|---|---|
| Dimensions (W x H x D) | 39 mm x 124 mm x 124 mm |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Wiring | input/output: screw type connection,
signal contact: push-in technique |
| Connection cross-section | input/output: e*: max. 6 mm², f*: max. 4 mm², a*: max. 4 mm² signal contact: e*: max. 1.5 mm², f*: max. 1.5 mm², a*: max. 1.5 mm² |
| Max. cable diameter with end sleeve | Input/Output: 2.8 mm, Signal contact: 1.6 mm |
| Connection cross-section AWG | Input/Output: AWG20-10 Signal contact: AWG28-16 |
| Stripping length | 7 mm |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use