EP3744-0041 | EtherCAT Box, 4-channel analog input + 8-channel digital combi, pressure, 0…1000 hPa (0…+1 bar), M8
6-mm fitting
connection
2 | Rx+
3 | Rx-
4 | Tx-
2 | Input
3 | GNDS
4 | Input
2 | Output
3 | GNDS
4 | Input
2 | +24 V DC UP
3 | GNDS
4 | GNDP
EP3744-0041 | EtherCAT Box, 4-channel analog input + 8-channel digital combi, pressure, 0…1000 hPa (0…+1 bar), M8
Measurement technology easily configured: Analog EtherCAT input terminals.
Measurement technology simply integrated: With the analog EtherCAT Terminals.
The EP3744-0041 EtherCAT Box, equipped with six digital inputs, two digital outputs and four pressure inputs, acquires these signals and transmits them – electrically isolated – to the controller. The signal status is indicated by LEDs; the digital signals are connected via 4-pin M8 screw type connectors.
The pressure is measured as the differential pressure to the fifth connection by an integrated 6 mm fitting. The pressure values are available as 16-bit values. Measurement can be made between -1…1 bar, with the value being output in relation to the fifth connection, e.g. for vacuum measurement in relation to the ambient pressure at suction grippers. In absolute-pressure mode it is possible to measure pressures between 0…1 bar.
Product status:
regular delivery
Product information
| Technical data | EP3744-0041 |
|---|---|
| Protocol | EtherCAT |
| Bus interface | 2 x M8 socket, 4-pin, a-coded, shielded |
| Number of inputs | 4 x pressure, 6 x digital |
| Number of outputs | 2 x digital |
| Connection method | digital signals: 4-pin M8; pressure measurement: 6 mm fitting |
| Conversion time | ~ 3.5 ms |
| Resolution | 1 mbar per digit |
| Signal type | air pressure |
| Measuring range | 0…1 bar (0…15 psi)/
-1…1 bar (-15…15 psi) |
| Measurement error/uncertainty | 3% |
| Distributed clocks | yes |
| Input filter | 10 µs (for digital inputs) |
| Specification | EN 61131-2, type 1/3 |
| Max. output current | 0.5 A per channel, individually short-circuit proof |
| Load type | ohmic, inductive, lamp load |
| Short-circuit current | typ. 1.5 A |
| Sensor supply | from load supply voltage, max. 0.5 A, short-circuit proof in total |
| Current consumption from US | 120 mA |
| Power supply connection | feed: 1 x M8 male socket, 4-pin, a-coded; downstream connection: 1 x M8 female socket, 4-pin, a-coded |
| Electrical isolation | 500 V |
| Special features | direct pressure measurement at the machine |
| Operating/storage temperature | -25…+60°C/-40…+85°C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Approvals/markings | CE, UL |
| Housing data | 8 x M8, 4 x M12 |
|---|---|
| Dimensions (W x H x D) | 30 mm x 126 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3 |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use