KL2532 | Bus Terminal, 2-channel motion interface, DC motor, 24 V DC, 1 A
+24 V
KL2532 | Bus Terminal, 2-channel motion interface, DC motor, 24 V DC, 1 A
Compact Drive Technology
The KL2532 Bus Terminal enables direct operation of two DC motors. It is galvanically isolated from the K-bus. The speed is preset by a 16 bit value from the automation unit. The output stage is protected against overload and short-circuit. The Bus Terminal contains two channels that indicate their signal state by means of light emitting diodes. The LEDs enable quick local diagnosis.
Product status:
regular delivery
Product information
| Technical data | KL2532 |
|---|---|
| Technology | compact drive technology |
| Load type | DC brush motor, inductive |
| Number of channels | 2 |
| Number of outputs | 1 x DC motor per channel |
| Number of inputs | 1 x end position per channel |
| Connection technology | direct motor connection |
| Output current | max. 1 A per channel |
| Max. output current | 2 x 1 A (short-circuit proof, thermal-overload proof for both channels together) |
| Resolution | max. 10 bit current, 16 bit speed |
| Encoder input signal | – |
| Pulse frequency | – |
| Current consumption power contacts | typ. 30 mA + load |
| Current consumption K-bus | typ. 50 mA |
| Bit width in the process image | 48 inputs/outputs: 2 x 16 bit data, 2 x 8 bit control/status |
| Electrical isolation | 500 V (K-bus/field potential) |
| Weight | approx. 55 g |
| Operating/storage temperature | 0…+55°C/-25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/see documentation |
| Pluggable wiring | for all KSxxxx Bus Terminals |
| Approvals/markings | CE, UL |
| Housing data | KL-12-8pin | KS-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| KL2532 | Bus Terminal, 2-channel motion interface, DC motor, 24 V DC, 1 A |
| KS2532 | Bus Terminal, 2-channel motion interface, DC motor, 24 V DC, 1 A, pluggable wiring |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use